Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
TRQ ignition coils will have your engine running like new. TRQ ignition coils are manufactured to precise specifications using premium raw materials to optimize each vehicle's ignition system. To ensure peak performance, TRQ recommends replacing ignition coils in sets to prevent electrical output imbalances. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi. I'm Mike from 1AAuto. We've been selling auto parts for over 30 years!
To replace the ignition coils, you've got four because this is a four cylinder engine. They are all situated right here on top of the engine. To do one of these, it will be identical for the other three.
I’m going to start by unplugging it, so you push the lock in, pull this out. You might have to take two hands and just pull it off. Put that aside. Take a 10 mm socket and ratchet. Loosen the nut that's holding this on. Be careful not to drop them, because they are very small and they're painted black so they're hard to see. Luckily, this one fell on top of the alternator, so we're good.
Now I'm just going to reach under here and work the coil out. I have to break the little seal that's in there. That's your coil.
Here's our original coil and our brand new one from 1AAuto.com. Same style connectors. Same style boots with rubber seals. Same size and same mounting hole. This should fit in the vehicle and work great for you. Since this coil was working just fine, we're going to reinstall it.
Push it right into the opening. Line it up with that stud that's there. I'll just push it right down. I'll slide over the electrode of the spark plug, and then I'll reinstall the nut that's holding it on. Plug it in. These are just 8.7 foot-pounds, so like 9 foot-pounds, which is really just hand tight. Just give them a little snug like that and it's all set.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
