1AXAA00181-Flex Light 2 Piece Set

Flex Light 2 Piece Set


Part Details

  • Color: Ultra Bright Red
  • Lighting Size: 20 Inch
  • Quantity: 2 Piece Set
  • Light Option: LED
Save 69%
List: $47.95 Save: $32.91
Part 1AXAA00181
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: TLS00840

Frequently bought together

Warranty & Shipping
How-To & Tools

Part Details

  • Lighting Size:   20 Inch
  • Color:   Ultra Bright Red
  • Quantity:   2 Piece Set
  • Light Option:   LED


  • Illuminates the interior of your vehicle or can be used on the exterior to alert other drivers of your presence
  • Designed to bend and conform into many shapes creating a plethora of locations for your LED flex lights
  • Can be cut to fit anywhere in your vehicle
  • Includes 3M tape and instructions for simplified installation

Universal Part Note:

This is a universal part and not a direct replacement for the existing part on your vehicle.  In some situations, modifications may be necessary for it to fit and function properly.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Soldering the Flex LED Light Wires to the Dome Light (1:43)
    • Decide the best location for the lights
    • Pry the dome light down with trim tools
    • Disconnect the wiring harness
    • Cut and splice the ends of the wires
    • Black and white wire goes to positive
    • Black wire goes to ground
    • Connect the black and white wire to the metal plate on the dome light
    • Solder the positive copper wire to the metal plate
    • Solder the negative copper wire to the brown ground plate
  2. step : Installing the Flex LED Light Underneath the Seat (3:49)
    • Connect the LED light electrical connector to the switch soldered to the dome light to test
    • Disconnect the electrical connector
    • Thread the wire through the ceiling into the dome light opening
    • Connect the connector to the dome light
    • Press the dome light into place
    • Thread the wire along the edge of the ceiling near the windshield
    • Pry down the A pillar trim
    • Thread the wire down the A pillar
    • Press the A pillar trim into place
    • Thread the wire and light behind the center console over to the passenger side
    • Slide the wire underneath the track to the seat, leaving some play
    • Peel off the tape from the backside of the light
    • Press the light to the metal plate under the seat
    • Move the seat forward and backward to test for slack
    • Feed the wire underneath the side trim of the center console
    • Repeat this process for the driver side

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Wire Cutters

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Specialty Tools

  • Trim Tool Set
  • Solder Kit

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

DIY Solutions
Brand #: TLS00840
Product Reviews
5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Very impressed
These are easy to install and very bright! Would buy again
June 21, 2020
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Flex Light 2 Piece Set-1AXAA00181 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.