Replaces

Ford Bronco F150 F250 F350 F450 Headlight Mounting Panel

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

This replacement headlight mounting panel is just what you need to get your vehicle in good looking form again!

Specifications:

  • Brand New Replacement Headlight Mounting Panel
  • Designed to be painted by buyer to match
  • Replaces dealer part number: F6TZ-8A284-AC, F6TZ8A284AC
  • Direct replacement
  • Designed to replace damaged original panel

This headlight header panel makes a great replacement and has good cost savings over a dealer header panel.

Note:

It is necessary to reuse your original hardware, as new hardware is not included with this item.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

    Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb. Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.

  1. step : To replace just the headlight bulbs (0:45)
    • Pop the hood and secure it.
    • Reach behind the headlight assembly.
    • Remove and replace the bulb.
  2. step : Remove the parking light assembly (1:50)
    • Use a 10mm deep socket to remove the bolt and the three nuts securing the parking light assembly
    • Remove the two Phillips screws at the top of the headlight trim panel
    • Pull the parking light out.
    • Unplug the wiring harness and bulbs.
  3. step : Remove the headlight assembly (3:20)
    • Use a pair of needle nose pliers or a bent tipped awl to unclip the three clips securing the headlight assembly
    • pull out and unplug the wiring harness and bulbs
  4. step : Aim headlights (4:55)
    • Adjust the adjustor bolts to match the old headlight assembly for a preliminary aim.
  5. step : install the headlight assembly (5:45)
    • Plug in the bulbs and harness
    • Seat the headlight assembly and clip it in
  6. step : Reassemble the parking light assembly (8:00)
    • You put the trim back in place with the parking and marker lights.
    • Make sure you reconnect the two side marker lights first, and then you can reconnect the larger parking light from the back, and then put the trim into place.
    • Start the two nuts on the back side and tighten them up.
    • Finish up by reinstalling the two screws on the top of the trim.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Specialty Tools

  • Bent Tipped Awl

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1992-1996Ford Bronco Ford Bronco Headlight Mounting Panel
1992-1996Ford F150 Truck Ford F150 Truck Headlight Mounting Panel
1992-1996Ford F250 Truck Ford F250 Truck Headlight Mounting Panel
1992-1997Ford F350 Truck Ford F350 Truck Headlight Mounting Panel
1992-1996Ford F450 Truck Ford F450 Truck Headlight Mounting Panel
Only 10 left in stock
Part 1ABHP00063
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.