Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Now, disconnect the connector, push down on the tab. And slide it out, it's the little tab right there. We're just gonna disconnect this connector just to have more room, you don't necessarily have to disconnect this one. Just push on the tab. Just gonna use a straight blade screwdriver. Push on the tab and slide it out. There's the tab right there. Now, take this bolt out, you need an 8-millimeter socket. Slide that out. You can slide this cover off, just slides down. Then just grab the assembly and just twist it to the left and slide it down. Now, the new blower motor assembly may have a screw right here, you wanna take that screw out. Just like that, leave that panel on there. Take the blower motor, and just try to get this started. And lock it in place. And take this cover, and slide it in position. And take the screw, get the screw started. And snug it up. That's good. Reconnect the resistor, connector, there. And reconnect the blower motor.
