1ABFS01793-Ford Mazda Mercury Front Ceramic Brake Pad & Rotor Kit

Replaces

2001 Ford Explorer 4 Door 4 Wheel Drive Front Ceramic Brake Pad & Rotor Kit

1ABFS01793-841871-2001
Guaranteed to fit: 2001 Ford Explorer

Fit Details

  • Front or Rear Location: Front
  • Number of Doors: 4 Door
  • Vehicle Drivetrain Configuration: 4 Wheel Drive

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Brake Pad Friction Material: Ceramic
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware
FREE SAME DAY SHIPPING
Save 29%
List: $118.95 Save: $34.00
Part 1ABFS01793
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA11351

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Ceramic
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (2) Front Replacement Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware

Premium Positive Molded Brake Pads Features and Benefits

  • Same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims & pad chamfering provide smooth & quite braking
Manufactured from OE Grade G3000 Casting Alloy.
Replacement Brake Kits Features & Benefits
  • Longer life - Positive molded to ensure even wear and enhanced performance
  • Less dust - Cleaner, quieter, smoother braking
  • Reduce vibration and noise - Balanced, finished surface
  • Cast from premium G3000 alloy for strength and durability

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Remove the wheel (1:07)
    • Pry off the lug nut cover
    • Loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and the tire.
  2. step : Remove the calipers (1:42)
    • Use your 1/2" socket and ratchet to remove the caliper bolts
    • Use a flat blade screwdriver or pry bar to compress the caliper pistons
    • Pry the caliper of the rotor.
    • Remove the two 15 mm caliper bracket bolts.
  3. step : Replace the rotor (4:21)
    • Pry off the grease cap.
    • Use your pliers to remove the cotter pin.
    • Remove the 27 mm nut.
    • Pull the rotor off.
    • Insert the outside bearing race.
    • Use your race installation tools to tap the race into place.
    • Install the interior race.
    • Apply bearing grease to the races.
    • Pack the interior bearing with bearing grease.
    • Use a paper towel to keep your race tools tidy and install the interior bearing.
    • Apply grease to the exterior race.
    • Clean the spindle and mount the rotor.
    • Install the exterior bearing and apply bearing grease.
    • Put the nut and washer on, and tighten it with your socket and ratchet to seat the bearing.
    • Spin the rotor and loosen the nut and then tighten it again.
    • Do this till the bearing is seated, then put the cotter pin through.
    • Replace the dust cap.
  4. step : Install the calipers (15:20)
    • Mount the caliper bracket and secure it with your 15 mm socket and ratchet
    • Torque these bolts to 80 ft lbs.
    • Compress the caliper with a C-Clamp
    • Apply anti-seize grease to the edges of the brake pads and insert them into the brackets.
    • Mount the calipers to the brackets and torque the bolts to 15 ft lbs.
  5. step : Put the wheel on (18:05)
    • Thread the lug nuts on.
    • Wiggle the wheel to make sure there isn't any play in the bearings.
    • Lower the vehicle
    • Torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Hammer

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 27mm socket
  • 15mm Socket
  • 19mm Socket

  • Sockets - SAE

  • 1/2 Inch Socket

  • Specialty Tools

  • Race Installation Tools


Fits the following Makes:

Year Make Model Description
1995-2000Ford Explorer Ford Explorer 4 Wheel Drive Front Ceramic Brake Pad & Rotor Kit
2001Ford Explorer Ford Explorer 4 Door 4 Wheel Drive Front Ceramic Brake Pad & Rotor Kit
1998-2000Ford Ranger Ford Ranger 4 Wheel Drive Front Ceramic Brake Pad & Rotor Kit
2001-2002Ford Ranger Ford Ranger 4 Wheel Drive with 4 Wheel ABS Brakes Front Ceramic Brake Pad & Rotor Kit
2001-2002Mazda B2300 Truck Mazda B2300 Truck 4 Wheel Drive Front Ceramic Brake Pad & Rotor Kit
1998-2001Mazda B2500 Truck Mazda B2500 Truck 4 Wheel Drive Front Ceramic Brake Pad & Rotor Kit
1998-2002Mazda B3000 Truck Mazda B3000 Truck 4 Wheel Drive Front Ceramic Brake Pad & Rotor Kit
1997-2001Mercury Mountaineer Mercury Mountaineer 4 Wheel Drive Front Ceramic Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 54035
Bendix PRT5075
DIY Solutions BFS00639
DuraGo BR54035
Raybestos EHT652H
Raybestos Brakes EHT652H
Raybestos Brakes 66576
Wagner BD125494

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BKA11351
Product Reviews
5.00/ 5.0 5
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
0
0
0
great product
October 4, 2018
I would recommend this product. Very good price, very good quality parts, fit like original equipment.
rotors and pads
March 11, 2019
must say your service is quick to deliver and the parts where perfect fit for my ford ranger Thanks Rich
Brake pads and rotors
September 30, 2019
Good quality and even better price. No issuses,would recommend
Great
May 12, 2020
Really easy to install with the step by step video. Great fit and quality parts!
Quick delivery
September 26, 2020
Had to wait while on back order, but they emailed me as soon as they were available, and I ordered immediately. They were on my doorstep a few days later! I’ve got a lot of confidence ordering from them that I get exactly what I need with the right fit and then I watch their awesome videos to learn how to do the job!
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company. See all trademarks.

Ford Mazda Mercury Front Ceramic Brake Pad & Rotor Kit TRQ BKA11351-1ABFS01793 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2001 Ford Explorer with these options.