1AZIS00008-Ford Nissan Mazda Lincoln Mercury Ignition Switch

Replaces

2000 Ford Explorer Ignition Switch

1AZIS00008-486022-2000
Guaranteed to fit: 2000 Ford Explorer
FREE SAME DAY SHIPPING
Part 1AZIS00008
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BSS00733

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a single purchase of a customized kit or set from DIY Solutions.

High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Returns: Parts with electrical components cannot be returned once installed.

  1. step : Accessing the Ignition Switch (0:55)
    • Use an adjustable wrench to loosen the nut on the battery cable.
    • Disconnect the negative battery cable.
    • Remove the four 7mm bolts that secure the panel under the driver side dash (two are under the hood latch).
    • Pull down and back to release the panel.
    • Using an 8mm socket remove the six bolts where the panel previously was.
  2. step : Removing the Ignition Switch (2:27)
    • Use a 7mm socket to unbolt the connection.
    • Remove the gray cover.
    • Remove the nut.
    • Use a T30 torx driver to unsecure the switch.
  3. step : Installing a New Ignition Switch (3:41)
    • With the connector facing the drivers door push the switch back into place and tighten the T30 screws back into place.
    • Plug the switch back in and reinsert the 7mm bolt back into place.
    • Replace the grey protector.
    • Replace the plate and six 8mm bolts.
    • Replace the panel and the the four 7mm bolts.
    • Reconnect the battery.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 8mm Socket
  • 7mm Socket

  • Star Drivers & Sockets

  • T30 Driver


Fits the following Makes:

Year Make Model Description
1992-1997Ford Aerostar Ford Aerostar Ignition Switch
1992-1996Ford Bronco Ford Bronco Ignition Switch
1990-1991Ford Country Squire Ford Country Squire Ignition Switch
1990-1991Ford Crown Victoria Ford Crown Victoria Ignition Switch
1992-2004Ford Crown Victoria Ford Crown Victoria Ignition Switch
2000-2005Ford Excursion Ford Excursion Ignition Switch
1997-2002Ford Expedition Ford Expedition Ignition Switch
1998-2000Ford Explorer Ford Explorer Ignition Switch
2001-2004Ford Explorer Sport Trac Ford Explorer Sport Trac Ignition Switch
1992-2003Ford F150 Truck Ford F150 Truck Ignition Switch
1997-1999Ford F250 Light Duty Truck Ford F250 Light Duty Truck Ignition Switch
1999-2004Ford F250 Super Duty Truck Ford F250 Super Duty Truck Ignition Switch
1992-1997Ford F250 Truck Ford F250 Truck Ignition Switch
1999-2004Ford F350 Super Duty Truck Ford F350 Super Duty Truck Ignition Switch
1992-1997Ford F350 Truck Ford F350 Truck Ignition Switch
2004Ford Freestar Ford Freestar Ignition Switch
1994-2004Ford Mustang Ford Mustang Ignition Switch
1995-2004Ford Ranger Ford Ranger Ignition Switch
1990-2005Ford Taurus Ford Taurus Ignition Switch
1994-1997Ford Thunderbird Ford Thunderbird Ignition Switch
1995-2003Ford Windstar Ford Windstar Ignition Switch
2002Lincoln Blackwood Lincoln Blackwood Ignition Switch
1991-2002Lincoln Continental Lincoln Continental Ignition Switch
1993-1996Lincoln Mark VIII Lincoln Mark VIII Ignition Switch
1998-2001Lincoln Navigator Lincoln Navigator Ignition Switch
2002Lincoln Navigator Lincoln Navigator (Built Before 3/29/96 Production Date) Ignition Switch
1990-2004Lincoln Town Car Lincoln Town Car Ignition Switch
1995-2003Mazda B2300 Truck Mazda B2300 Truck Ignition Switch
1995-2003Mazda B2500 Truck Mazda B2500 Truck Ignition Switch
1995-2003Mazda B3000 Truck Mazda B3000 Truck Ignition Switch
1995-2003Mazda B4000 Truck Mazda B4000 Truck Ignition Switch
1994-1997Mercury Cougar Mercury Cougar Ignition Switch
1990-2004Mercury Grand Marquis Mercury Grand Marquis Ignition Switch
1998-2001Mercury Mountaineer Mercury Mountaineer Ignition Switch
1990-2005Mercury Sable Mercury Sable Ignition Switch
1993-1995Mercury Villager Mercury Villager Ignition Switch
1993-1995Nissan Quest Nissan Quest Ignition Switch

Part Interchange

Brand Label Part Number
DIY Solutions BSS00733

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: BSS00733
Product Reviews
5.00/ 5.0 6
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
Part arrived on time
March 4, 2017
Part fits my auto (is identical dimensions & electric functions) and installed as video instructed. My problem with low voltage to the fuel pump was cured. (Original equipment part was 17 years old)
Solved the problem
August 12, 2017
We were having sporadic starting problems and this solved the problem. It arrived on schedule and works great.
Lifesaver!!!
February 9, 2020
I bought this ignition switch for my early 99 7.3L Stroker. I had installed a Dorman, from the local auto parts store as a filler until this one finally arrived. The Dorman shorted out shortly after replacing the previous one. I don't believe it was any manufacturer defect, the previous owner of my vehicle did quite a number on the wiring, or should I say he left a bird's nest!. Long story short, we ran out of answers so I decided to remove everything the previous owner had installed including a Viper alarm and pod gauges. Installed the OEM switch... voila! It cranked over and ran...still running. Very happy with purchase, so far!
Good quality
April 14, 2020
Only place that actually provided good quality with all necessary mounting hardware included! Will definitely be shopping here more
1a quality
May 1, 2020
Fit the car my schedule and my budget....will do business again
Ignition switch
May 7, 2020
I needed a ignition switch for my 96 f150 and this one is a perfect match to the OE ignition switch. Simple to change out and if your not sure you can watch the 1a auto video on YouTube.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
will a falty ignition switch sonetimes not power uo the fuel pump?
December 14, 2018
10
There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. Once you know the cause, we'll be happy to see if we carry the parts and how-to videos needed for your repair.
December 14, 2018
Does a new ignition switch require a anti theft (PATS) reset to the key or switch???
March 11, 2019
10
This does not require a PATS reset to the key or the switch.
March 11, 2019
10
No, replacement of the switch did not affect the key or PATS.
March 11, 2019
10
No, I just installed and she was good to go.
March 17, 2019
What would cause the truck to start with ignition switch but will not kill engine and power stays on in cab?
April 10, 2020
10
Thanks for your inquiry. There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. Once you know the cause, we'll be happy to see if we carry the parts and how-to videos needed for your repair.
April 10, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company. See all trademarks.

Ford Nissan Mazda Lincoln Mercury Ignition Switch DIY Solutions-1AZIS00008 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2000 Ford Explorer with these options.