1ASHF00177-Honda Civic FIT Acura EL Front Driver or Passenger Side Wheel Hub

Replaces

Honda Civic FIT Acura EL Front Driver or Passenger Side Wheel Hub TRQ

1ASHF00177

Part Details

This part replaces:

  • Hollander 538-58878A 538-58878B
  • Dorman 930-456
  • OE # 44600S5AJ00
  • OE # 44600S5DA00
  • TRQ BHA53077
FREE SAME DAY SHIPPING
Save 33%
List: $57.95 Save: $19.00
Part 1ASHF00177
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA53077
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Highest Quality Materials

Made from highest quality materials that meet or exceed OEM standards

Direct Fit Replacement - Guaranteed to fit and function for your specific application
Quality Tested - built to a strict level of product standards.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

BHA53077 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:55)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Hub Nut (1:25)
    • Remove the dust cap with a chisel and hammer
    • Insert a tapered punch into the punched slit between the retainer and nut
    • Tap the punch to separate the nut
    • Remove the 32mm nut axle nut with a pry bar and breaker bar
  3. step : Removing the Caliper (1:52)
    • Remove the 17mm bolts from the caliper bracket
    • Remove the caliper and caliper brackets assembly from the rotor
    • Hand the caliper with a wire tie or bungee
  4. step : Separating the Ball Joint (2:28)
    • Bend the cotter pin tab out with needle nose pliers
    • Pry the cotter pin out
    • Remove the 17mm castle nut on the bottom of the ball joint
    • Tap up with a hammer to release the ball joint
    • Use a pickle fork to separate the ball joint if needed
  5. step : Removing the Spindle (3:45)
    • Remove the 22mm bolts from the bottom of the strut
    • Unbolt the wheel speed sensor with a 10mm socket and ratchet
    • Remove the sensor with a pair of pliers
    • Tap the center of the CV axle
    • Pull the axle out of the spindle
  6. step : Removing the Backing Plate and Hub (5:04)
    • Insert the hub and rotor into the hydraulic press
    • Press the hub out of the bearing
    • Remove the three Phillips screws from the backing plate
    • Remove the backing plate
  7. step : Removing the Bearing (5:37)
    • Squeeze the snap ring with snap ring pliers
    • Pry the snap ring out with a flat blade screwdriver
    • Press the bearing out with a hydraulic press
  8. step : Installing the Bearing (6:15)
    • Press the bearing into the knuckle with a hydraulic press
    • Attach the snap ring to a pair of snap ring pliers
    • Press the snap ring into the bearing
  9. step : Installing the Backing Plate and Hub (6:28)
    • Insert the backing plate to the knuckle
    • Tighten the three Phillips screws to the backing plate
    • Place the old bearing on the back of the inner bearing for support
    • Place the spindle into the hydraulic press
    • Insert the hub into the spindle with the hydraulic press until it bottoms out
  10. step : Installing the Spindle (7:04)
    • Insert the lower ball joint into the control arm
    • Line up and press the CV Axle into the hub
    • Insert the 22mm bolts (head facing front of car) into the bottom of the strut
    • Torque the strut bolts to 116 foot-pounds with a 19mm wrench on the bolt side
  11. step : Installing the Hub Nut (8:34)
    • Insert the hub nut into place
    • Torque the 32mm hub nut to 134 foot-pounds with a pry bar to keep the hub still
    • Dent the outer ring on the axle nut into the keeper groove with a hammer and pick
    • Tighten the 10mm bolt to the wheel speed sensor
  12. step : Installing the Ball Joint (9:38)
    • Align the castle nut with the windows on the control arm
    • Torque the castle nut to 43-50 foot-pounds
    • Insert the cotter pin into nut
    • Bend the cotter pin underneath
  13. step : Reinstalling the Brake Caliper (10:33)
    • Insert the brake rotor into place
    • Tighten the Number 2 Phillips screw to the brake rotor
    • Spread the pads and insert the caliper into place
    • Tighten the 17mm caliper bolts
    • Torque the caliper bolts to 80 foot-pounds
  14. step : Reattaching the Wheel (11:45)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Center Punch
  • Hammer
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 32mm Socket
  • 19mm Socket
  • 17mm Socket
  • 22mm Socket
  • 10mm Socket


Fits the following Makes:

Year Make Model Description
2001-2005Acura EL Acura EL Front Driver or Passenger Side Wheel Hub
2001-2005Honda Civic Honda Civic HX Front Driver or Passenger Side Wheel Hub
2001-2005Honda Civic Honda Civic GX Front Driver or Passenger Side Wheel Hub
2001-2005Honda Civic Honda Civic EX Front Driver or Passenger Side Wheel Hub
2001-2005Honda Civic Honda Civic DX Front Driver or Passenger Side Wheel Hub
2001-2005Honda Civic Honda Civic Value Package Front Driver or Passenger Side Wheel Hub
2001-2005Honda Civic Honda Civic LX Front Driver or Passenger Side Wheel Hub
2003-2005Honda Civic Honda Civic Hybrid Front Driver or Passenger Side Wheel Hub
2005Honda Civic Honda Civic EX Special Edition Front Driver or Passenger Side Wheel Hub
2005Honda Civic Honda Civic LX Special Edition Front Driver or Passenger Side Wheel Hub
2009-2013Honda FIT Honda FIT Front Driver or Passenger Side Wheel Hub

Part Interchange

Brand Label Part Number
DIY Solutions HUB00177

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BHA53077
Product Reviews
5.00/ 5.0 1
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
So far so good
February 25, 2017
Ive had these on for a few weeks now and haven't had any problems. It was a lot cheaper than buying it at an auto parts store. Good quality and the steel and brass color gives this wheel hub a nice look.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Honda Civic FIT Acura EL Front Driver or Passenger Side Wheel Hub TRQ-1ASHF00177 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.