How To Replace Rear Wiper Switch 2002-09 GMC Envoy

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the rear wiper switch on this 2003 GMC Envoy XL. The only tool you'll need for this is a flat blade screwdriver.

Using a flat blade screwdriver, carefully pry out at the top of this panel, and reach back behind it and pry out. Push the tabs on either side of the wiper switch, and then feed it through. Pull the switch out, and, using a flat blade screwdriver, pry out on this tab, and then disconnect the harness.

Take your new switch, plug the harness into place, and then push the switch back in. Then line up those lower tabs on the panel. Then push the vents back down and in. Line up those pins and then push the panel back until it snaps in. You're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.