How To Replace Vapor Canister Purge Solenoid 2003-10 GMC Savana
Created on: 2013-09-24
Watch this video to learn how to fix emissions problems. The experts at 1A Auto show you how to replace the vapor canister purge solenoid on your 03-10 Chevy Express or GMC Savana van.
-
step 1 :Removing the Vapor Canister Purge Solenoid
- Clip off the wire tie with wire cutters
- Remove the cover to the canister purge solenoid
- Disconnect the wiring harness
- Push on the clip and slide the solenoid back
- Disconnect the hose
-
step 2 :Installing the New Vapor Canister Purge Solenoid
- Push the cover onto the canister purge
- Clip the purge solenoid in place
- Connect the hose
- Connect the wiring harness
- Clip on a new wire tie
Tools needed
-
Flat Blade Screwdriver
Wire Ties
Wire Cutters
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the evap purge solenoid on this 2005 GMC Savana 2500. It's similar on a large variety of GM models. The only tools that you're going to need for this are a flat blade screwdriver and some wire cutters.
To start off, we're just going to show you where you find this in between the door and the gas tank on this van. It's right under here. You look up, it's right here.
The first thing that you want to do is take your wire cutters and just clip off that wire tie. Then you can remove this cover. For now, because it's behind it, you can tuck it up. Pull that harness out, it just pulls right out.
Now, using a flat blade screwdriver, you want to push the clip down and slide the solenoid back, and it should come right off. Now, what you want to do is just disconnect the hose here. You can see here, new part from 1A Auto on the right, old part on the left. They're identical in every way, same mounting clip, and everything.
What you want to do is just put that cover back on to it. It just fits right on, and then you want to put it up back underneath the car.
You just want to angle that clip onto the clip underneath the van. It can be a little difficult because of the box there, but if you just pull that back, eventually once you get it lined up, you just twist it in and it should just slide right there.
Now what you want to do, reconnect the harness and that hose, and now you can put a wire tie so that cover stays on. Then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How to Replace Vapor Canister Purge Solenoid Valve 2007-14 Chevy Suburban 1500
Check out this video to learn how to replace the vapor canister vent valve on your 07-14 Chevy Suburban.
