Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Hi. I'm Mike from 1AAuto. We've been selling auto parts for over 30 years!
Hi, everyone. Sue here at 1A Auto, and today we're replacing the splash shields under the undercarriage of our '07 Mazda3. As you can see, the old ones are quite worn from New England weather. We got these at 1AAuto.com, so if you need these parts, or any other parts for your car, click on the link below. Come on over to 1AAuto.com.
On this particular car, someone's been in here before, trying to reinforce the undercarriage splash shield, so they have a lot of aftermarket hardware. There's various, from 13 millimeter sockets to 8 Phillips screwdrivers. So, your vehicle’s, if it's factory, are different sizes, and if you've done some repairs, or you have a used vehicle, you might have different sizes. So, it all varies. There we go.
The front splash shield and the back splash shield are stuck together, because this bolt is completely rusted in the clip. I'm going to take them both down together, and that way I can access the backing clip a lot easier.
I’m going to reassemble the front splash shield. Put this one up first. All right. Put the center bolt in first. There's five total here. You guide everything up. It looks like the this. The end tabs go over the plastic. Yeah. That one fell into place naturally.
Now I can start my bolts. I'm probably going to tighten this one. Okay. That one's in. There we go. This side shield's broken. There we go. Okay. It doesn't help when the bumper's been crushed a little bit. There we go. Sweet.
There should be four of these. Two on both sides, but the passenger side, the inner fender wall has been cut out, in this thing, so I'm going to use some plastic wire ties. Someone already pre-drilled some holes, so I'm just going to put them right through the body clip. Put a new one on the front. Cut the ends off. Get that clip in. There you have it. We're done.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
