Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the driver's side mirror assembly on this 2003 Nissan Frontier. It's pretty much the same for model years 2001 through 2004. You'll need a new mirror assembly from 1AAuto.com, as well as a pocket flat blade screwdriver and a Phillips screwdriver.
Locate the Phillips head screw in the door handle, as well as down there in the door grab and the plastic clip up in the corner. Use a small flat blade screwdriver to pry that little clip off, and then I'm going to use a Phillips head screwdriver to turn those two screws. I'll fast-forward as I do that. Lift off the rear of the arm rest. You'll expose another Phillips head screw right there. I'll go ahead and fast-forward as I remove that. Now remove the portion of the arm rest with the switch pack assembly in it. Just pull it up, and you'll notice two connectors, and they're just removed by pressing the tab in on them and pulling them out. Go ahead and do that.
Notice this exposes another Phillips head screw, and I'll go ahead and fast-forward as I remove that. Now, the only thing holding the door panel on are plastic flip sitters behind it, and just give a good tug to the door and it should pop right off. You can pull it and put it out of the way. Peel back on the upper portion of that paper barrier, and you'll see a wiring harness with a connector that goes to the mirror. Push the tab in and disconnect it. You'll notice a plastic clip that holds the harness that goes to the mirror right there. I'm just squeezing it from the back side and pulling it out to get it out of the way, and, at the same time, using a little flat blade screwdriver to help push it through.
Locate the three Phillips head screws that hold the mirror. I'll fast-forward as I remove those three screws. With those three screws out, the mirror should be loose and you can go ahead and pull it right out. I've got some rain guards on my windows. That's what's kind of making it difficult in pulling it, and make sure that you feed your harness up through the door panel there and pull it out.
Here, you can see the old part with the new part from 1A Auto. It's brand new, shiny, new glass, that black texture and the corresponding connector. Feed the wiring harness down inside and place the mirror in.
You want to now reinstall and tighten the three screws that hold the mirror on, and we'll just fast-forward as he does that. When you tighten them, tighten them up nice and firm. You don't want to over tighten them and warp or break the mirror. Now, pull your harness through and plug it in.
Line up the plastic clips on the inside of the door panel with the corresponding holes in the door itself. Place the top of the door panel on to the sill and feed your wiring harness through to the spot where it goes. Place your door panel on the sill and once you know that those plastic clips are in place, give it a couple of whacks around the outside to fully sit them.
Start to reinstall your Philips head screws right there in the inner door handle, and then the two that were hidden by the arm rest, and then the one in the door grab handle, as well as the clip that goes up in the triangular piece that covers the mounting screws for the mirror. I'll go ahead and fast-forward as I do that.
Now you can take your door handle and switch pack assembly, reinstall the connectors to it, and then place it down inside of the door there, starting with the back side and then working your way to the front. By pushing it down, you can see the clips flip in, and then you can go ahead with the back portion of the arm rest. Slide that in and then down in the back, and then once that's all set, you can then reinstall the final Philips head screw.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
