DMIMK00001-Seat Bottom & Back Heater Kit Pair

Seat Bottom & Back Heater Kit Pair Dorman DMIMK00001

DMIMK00001-2548-2002
FREE SAME DAY SHIPPING
Single Bucket Seat (Upper & Lower Cushion) Deluxe Heater Kit w/Lighted HI-LO Switch Pair (Dorman)
Save 28%
List: $161.95 Save: $46.00
1
Add to Cart
Only 9 left in stock
Part DMIMK00001
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Dorman
Brand #: DMIMK00001

Frequently bought together

Single Bucket Seat (Upper & Lower Cushion) Deluxe Heater Kit w/Lighted HI-LO Switch Pair (Dorman)
Seat Bottom & Back Heater Kit Pair Dorman DMIMK00001
$115.95
Park Right: Battery Powered Garage w/Dual Laser Park Assist (Requires Two AA Batteries)
Dual Garage Parking Assist Laser Park Right 37110
$33.95
Description
Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   Pair

Dorman Seat Heater Kit Pair: 628-040

These kits will install in any car with a 12 volt electrical system. Each kit is designed to install between your seat upholstery and the padding underneath. Installation requires removal and re-installation of seat and seat covers, as well as basic knowledge of the vehicle's wiring.

Specifications:

  • Dorman Seat Heater Kits
  • Comes as a PAIR
  • High quality lighted switch
  • Secure high quality connectors
  • Comes with detailed instructions

Most components in these kits are the very same items that manufacturers install in cars and trucks at the factory. This is a great addition to any car.

 

Universal Part Note:

This is a universal part and not a direct replacement for the existing part on your vehicle.  In some situations, modifications may be necessary for it to fit and function properly.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.  Shipping is not available to Canada for this item.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses.  Final shipping costs are available at checkout.

How To Install Seat Heater In Your Vehicle

Created on: 2021-01-16

This is a general video that will show how to install and wire seat heaters from 1aauto.com on most vehicles to convert your seats to heated seats

  1. step 1 : Removing the Seat
    • Roll the seat all the way back
    • Remove the two 15mm bolts from the bottom of the track
    • Roll the seat all the way forward
    • Remove the two 15mm bolts from the bottom of the track
    • Roll the seat all the way back
    • Tilt the seat up
    • Disconnect the wiring harness if you have power seats
    • Remove the seat
  2. step 2 : Removing the Seat Panel
    • Remove the two Phillips screws from the plastic panel on the seat
    • Flip the chair over
    • On the bottom, remove the Phillips screws from the top and bottom of the seat
    • Remove the wiring harness from the plastic panel if you have power seats
    • Remove the handle with a T25 Torx Bit
  3. step 3 : Removing the Seat Cover
    • Pull up the seat cover from around the edge with a flat blade screwdriver
    • Unclip the lower seat cover from the upper seat cover
    • Place the seat upright
    • Pull the clip from the seat cover out towards the front of the seat
    • Tip the seat onto its back
    • Separate the foam from the seat cover
  4. step 4 : Installing the Foam Pads
    • Fit the heat pad inside the seat
    • Peel the adhesive strip from the heat pad
    • Push the heat pad into the foam
    • Tilt the seat upright
    • Pull up the lower seat cover
    • Separate the foam from the seat cover
    • Push the harness from the heat pad out through the back of the seat
    • Place the heat pad underneath the seat cover
    • Peel the adhesive strip from the heat pad
    • Push the heat pad into the foam
    • Pull the seat cover down over the foam
    • Flip the chair upside down
    • Re-clip the upper seat cover to the lower seat cover
    • Re-clip the lower seat cover
  5. step 5 : Removing the Lower Dash Panel
    • Pull off the fuse box door from the dash panel
    • Remove the 7mm bolt from the side of the dash panel
    • Remove the two 8mm bolts from the bottom of the dash panel
    • Pry out the mirror control panel
    • Remove the two Phillips screws behind the mirror control panel
    • Pull down the lower dash panel
    • Disconnect the trunk wiring harness from the panel
    • Remove the lower dash panel
  6. step 6 : Installing the Seat Heater Wiring
    • Pull up on the center console panel
    • Thread the wires from the heating switch harness underneath the center console panel
    • Thread the heating switch harness wires up into the lower dash panel area
    • Run the ground and fuse wires up through the fuse panel area
    • Bolt the ground wire to something metal - we remove a 10mm bolt from the body, place the ground on the clip, and replace the bolt
    • Pull out the largest fuse with pliers
    • Clip the fuse wire onto the tooth of the fuse
    • Push the fuse into place
    • Bundle up the fuse wires
    • Wire-tie the fuse wires together
    • Clip the excess from the wire-tie with wire cutters
  7. step 7 : Placing the Seat Heater Switch into a Panel
    • Disconnect the mirror switch wiring harness
    • Disconnect the seat heater wiring harness
    • Mark where you want the switch on the panel with marker
    • Drill a hole with a 25/32 drill bit
    • Clip the switch into the hole on the panel
  8. step 8 : Installing the Lower Dash Panel
    • Connect the mirror switch wiring harness
    • Connect the seat heater wiring harness
    • Connect the trunk wiring harness to the lower panel
    • Align the lower panel
    • Insert the Phillips Head screws to the lower panel
    • Push the mirror/seat heater panel into place
    • Insert and tighten the 8mm screw
    • Insert and tighten the 7mm screws
    • Replace the fuse box door
  9. step 9 : Installing the Seat Panel
    • Connect the wiring harness if you have power seats
    • Press the panel into the side of the seat
    • Insert the four Phillips screws into the seat panel
    • Flip the seat over
    • On the bottom, insert the Phillips screws on the bottom of the panel below the seat
    • Tuck the seat heating wire into the panel
    • Insert the Phillips screw on the top of the panel below the seat
    • Wire-tie the heat pad harnesses to the bottom of the seat
    • Flip the seat upright
    • Insert and tighten the T25 Torx bolt into the side handle
  10. step 10 : Installing the Seat
    • Place the seat upright in the vehicle
    • Connect the heat pad wiring harness
    • Connect the power wiring harness if you have power seats
    • Thread the 15mm bolts on the track behind the seat by hand
    • Tighten the 15mm bolts preliminarily
    • Thread the 15mm bolts on the track in front of the seat by hand
    • Tighten the 15mm bolts preliminarily
    • Tighten all four bolts the rest of the way
  11. step 11 : Testing the Heated Seats
    • Start the vehicle
    • Turn the heated seats on High
    • Test the seat for thirty seconds to a minute

Tools needed for replacement

  • Drills, Drill Bits & Related

    25/32 Drill Bit

    Drill

  • Materials, Fluids, and Supplies

    Hog Rings

    Wire Ties

    Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

    Hog Ring Pliers

    Needle nose pliers

    Wire Cutters

  • Ratchets & Related

    Ratchet

  • Screwdrivers & Related

    Flat Blade Screwdriver

    Phillips Head Screwdriver

  • Sockets - Metric

    15mm Socket

    8mm Socket

    7mm Socket

  • Star Drivers & Sockets

    T25 Driver

Installation Video
Watch video

Fits these Makes

Part Interchange

Brand Label Part Number
DIY Solutions RES00284
DIY Solutions RES00295

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
Dorman
Brand #: DMIMK00001
Product Reviews
4.50/ 5.0 2
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Can this be done
October 3, 2020
overall pretty good instructions, could have been better on power source, need better wiring harness for full sized truck too short, relay and splices too close to switch hard to get into dash.heater pads easy install and work really great once powered up, recommend 1/2 day each seat need time
Works as advertised
November 10, 2020
I threw these into a Buick Encore with relatively little trouble. Any trouble I had was with finding a place to power these in the car itself, so that's nothing to do with the heaters. They heat well, and there was plenty of cable to reach pretty much anywhere in the car if I needed it.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is this a wire or ceramic heater?
March 3, 2017
10
This will be a wire heater.
March 3, 2017
10
wire. I didn't realize it was a universa seat warmer so you do have to run new switches that are supplied I took the seats out each one took about an hour and a half to do it works fine
March 3, 2017
10
Wire. I do like it though. Quick and hot.
March 4, 2017
What was the tool that was included for? I didn't see it used in the video.
January 16, 2018
10
Tool is used to crimp rings around the seat fabric if factory seat had any crimps holding the fabric to the seat frame.
January 16, 2018
What is the WATTAGE of these heaters? I am comparing to heated seat covers which I found in one description are 32 Watts, but have not been able to find any wattage information for any aftermarket seat heater kits.
December 28, 2020
10
We do not have that info available for these.
December 28, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Enter Vehicle Year Make Model

Not all parts are the perfect fit. Enter your Vehicle and we'll confirm fit, or help get you to one that will.

Seat Bottom & Back Heater Kit Pair Dorman DMIMK00001-DMIMK00001 does not fit your:

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

If your vehicle isn't listed, search Seat Heater Kits

This part will only fit a with these options.

If your option isn't listed search Seat Heater Kits