Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and, please, next time you need parts for your vehicle, think of 1AAuto.com.
In this video, we're going to show you how to replace the four-wheel drive speed sensor on this 2002 Chevy Suburban. It's the same part and similar process on these Suburbans from 2000 - 2010. The items you'll need for this is a new four-wheel drive speed sensor from 1AAuto.com, and a 19mm wrench. You may want to use jack and jack stands for some extra room, but they're not required.
Your four-wheel drive speed sensor is located right here. You'll want to just lift up on this tab and pull the harness free. Then, using an 19mm wrench just twist the sensor out. We'll fast-forward as Mike does this. Pull out this O-ring.
On the left is the old speed sensor, on the right is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Push your new speed sensor down into place and twist it in. We'll fast forward as Mike does this and then tightens it up with the 19 mm wrench. Reconnect the harness, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
