Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Light Assembly 2002-04 Jeep Liberty
Created on:
Tools used
T20 Driver
1. Removing the Tail Light
Remove the two T20 Torx bolts from the Tail Light bracket
Open the trunk to reach the driver side T20 bolts
Pull the tail light out
Disconnect the tail light wiring harness
2. Servicing the Bulbs
Twist the bulb socket counterclockwise out of the light
Pull the bulb off of the socket
Push on the new bulb
Twist the bulb clockwise into the light
3. Installing the New Tail Light
Reconnect the wiring harness to the tail light
Line up the bolt holes on the tail light bracket to the bolt holes on the vehicle
Replace the T20 Torx bolts into the tail bracket
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulbs as well as replace the entire taillight assembly on this 2004 Jeep Liberty. We show you on the driver side, but the passenger side is the similar procedure. It's the same part and similar process on these Liberties from 2002 to 2004. The only items you'll need include new taillights from 1AAuto.com and a T20 Torx driver.
For your passenger side taillight, the two T20 Torx bolts holding it in are right here, but for the driver side, you're going to have to go through right here, here, and one right here. We're just going to fast-forward as Don removes both of those. Once those removed, the taillight will pull right out.
Pull the harness clip from the bottom of the taillight. Push the tab and disconnect the harness. To service the bulbs, you just twist these sockets counterclockwise and pull them out. You can pull the bulb out. Push your new bulb in and twist the socket clockwise back into place. The other two are the same procedure.
On the left is the old taillight; on the right is the new one from 1A Auto. You can see they're identical, and they're going to fit exactly the same. Line up this pin with this hole and just push the taillight back into place. Then replace those two T20 bolts, and it helps to put them onto the driver. Feed it back into place and just twist it in. We'll just fast-forward as Don replaces both of those bolts. Once you're done with that, you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
CS332-B000R
In Stock
Product Reviews
Loading reviews
5.00/ 5.04
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
wired better then oem parts
John
July 8, 2017
i liked it shipping was quick and personal on phone was very good and frindley.and explained to me the differance bettwen the lite you sell compared to oem parts.
Y
July 12, 2019
I paid for two day service and I got it on time !! Also replacing it with the new tail light I order resolve my problem!!!!! I followed the video provided by 1aauto and problem gone ! No more tickets issue to me for tail light out !!! Thank you 1aauto !!!!!!
Awesome service!
Karen
September 28, 2019
This was the first time I had purchased anything from your company, and I was very impressed with how easy it was to order the part I needed and how quickly it arrived. If I ever need anything else I will definitely order from you.
Perfect Purcahse
H
November 13, 2020
I noticed that my old tail-light housing was trapping water within the bulb area. I found "1A Auto" while searching for a replacement unit. Their videos are perfectly produced, and clearly demonstrates how to install the new tail-light housing.
The unit arrived perfectly packaged and even contained the separate sockets and bulbs. I simply removed the damaged unit, installed the new unit (as per the video instructions), and voil, I was on the road again~!
Great price with no headaches, no mess, no stress... perfect purchase~!
Customer Q&A
Does this tail-light housing come with the three bulb sockets?October 12, 2020
H O
10
yes
October 12, 2020
Jos-Luis B
10
Yes just plug in and go. Had bulbs in it
October 12, 2020
D F
10
Can't remember but if you have 2004 jeep liberty model then this is all you need. It's perfect for that model
October 13, 2020
Z G
10
Yes, the sockets will be included as part of the assembly. Please let us know if you have any questions!
October 13, 2020
Emma F
10
Yes it does. I checked it to make sure.
October 15, 2020
Crystal L
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Jeep is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Jeep or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.