Replaces
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how to video helps you out and the next time you need a part for your vehicle, think of 1aauto.com. Thanks.
In this video, we are going to show you both replacing the entire headlight assembly as well as just changing the bulb on this 2003 Nissan Altima. The process is basically the same for 2002 to 2006, although the headlights do differ from year to year.
You'll need new headlights from 1AAuto.com, 10mm socket and ratchet with extension, Phillips screwdriver, and a flat blade screwdriver.
Now you can see that our vehicle is jacked up. You don't actually have to do this; we just do it to make it easier for you to see and you want to just remove this Phillips screw right here and now you can pullback that inner fender and up here you'll see there is a 10mm bolt right here and straight back along the same rail there, there is actually another 10mm bolt and we'll just fast forward as Don removes both of those. Now, you have better access to get this 10mm bolt right here and again we'll fast forward as Don removes that.
Now, at the top of your bumper cover next to the headlight, there are these clips. You just want to use a flat blade screwdriver to pry up the center and then it will pull right out, but this one you can see it's broken, we'll use some wire cutters to get underneath it. You don't actually cut the clip, we just use it to help pry up the center and now you can just pull the clip right out.
Now at the top of the headlight, you see there are two 10mm bolts. Go ahead and remove both of those. Pull straight out on your bumper cover and that will release a clip right here and now you have better access to get to this 10mm bolt underneath the headlight right there and, again, we'll just fast forward as Don removes that. Now with those 10mm bolts out, you can pull the headlight right out. You'll need to pull back on the bumper cover a little bit and on the back of the headlight, you'll see this three harnesses and you just want to push in on the tab right there and just pull straight up on them. They come right off. If you are just looking to service you bulb for this one you just twist it counterclockwise, it pulls right out then you twist the new one clockwise. For your turn signal bulb, twist the socket out counter clockwise, pull the bulb straight out. You'd push your new one in and twist the bulb back in clockwise. For this bulb, you want to turn that cover counter clockwise and pull it back. You may have to push the wires thought it just a little bit and then you want to pull this little clips off of the little pegs and pull up on this little wire retainer and then your bulb will pull out and you'll just replace that. Push it back into place. You want to push that little retaining clip back down over it to hold it all together. And then just reconnect those wires to those pegs and twist that cover back on clockwise.
On the left is the original. On the right is the new light from 1A Auto, clear and bright. Make your car look better and you'll be able to see better at night, as well. Now you want to take the turn signal bulb from your old light and twist it into your new light from 1A Auto and reconnect the harnesses to your new headlight. Line your headlight up, push it into place and then we are going to fast forward as Don replaces those two 10mm bolts at the top of the headlight. Now the 10mm bolt on the side of the headlight and underneath the headlight.
Now push your bumper cover back into place and replace those two 10mm bolts that hold it up. Push the inner fender back into place and replace that Phillips screw. And all that's left is installing those two clips. Just push them in and push down the center to lock them.
On the passenger side is the new headlight. On the right is the old one and you can just see in this picture how much nicer the passenger side of the car looks. Not only does it make the car look newer, it also will help you see much farther at night.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
