Kit Includes: (1) Passenger Side Mirror (1) Driver Side Mirror (2) Mirror Caps
Mirror Signal Type: Smoked Lens Turn Signal & Clearance Light
Mirror Type: Towing
Mirror Arm Style: Dual Arm
Mirror Extension Type: Manual-Telescoping
Mirror Adjustment Type: Electric
Mirror Folding Type: Power-Folding
Mirror Memory Type: Memory
Heated Mirror: Yes
Install Tip: Fold and unfold the mirror head electronically for a minimum of 3 cycles on first use. Folding the mirror manually can damage the folding module.
Trusted Quality: Trail Ridge Truck Accessories are developed and built with a promise to provide high quality, durable parts for your truck; backed by the best warranty in the automotive industry. Manufactured from the highest quality materials and constructed to meet or exceed OEM standards. Every Trail Ridge part is rigorously tested ensuring superior fit, function, and durability. Quality, trusted value, and hassle-free installation backed by our 100% satisfaction guarantee.
Upgrades and extended vision ideal for towing Enhanced mirror options for visibility and damage prevention Direct-fit replacement Highest quality construction and materials prevent corrosion, dust and chipping Easy plug and play install with original mounting and connectors
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How To Replace Side Rear View Mirror 2004-08 Ford F-150
How to Replace Tow Mirrors 2009-2014 Ford F-150
How To Install Trail Ridge Tow Mirrors 2007-14 Ford F150
How to Replace Mirror Caps 2009-2014 Ford F-150
How To Setup Lighting on Tow Mirror 2007-14 Ford F150
For more detailed instructions on how to do this, check out our other videos.
2. Remove the side mirror
Peel back the water shield from the side mirror triangular panel.
Unplug the wiring harness.
Remove the three 11 mm nuts.
Pull the mirror off, unclipping the mirror in the process.
3. Install the new mirror
Push the mirror into place, clipping it in.
Secure the mirror with the 11 mm nuts with your socket and ratchet.
Plug in the wiring harness.
Replace the plastic water shielding.
4. install the door panel
Check out our other videos for more detailed instructions.
Brought to you by 1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Hi, I'm Mike Green. I'm one of the owners of 1AAuto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be showing you how to replace the outside mirror on this 2006 Ford F150, same as any '04 to '08 F150. The tools you'll need are metric sockets from 5 millimeters to 11 millimeters, for the door panel 7/32 and 5/16 works for some of those, a small flat blade screwdriver and a putty knife and a rag to protect your paint. Okay, to get the mirror off, you do have to remove your door panel. I am fast forwarding it through right here. You can check out our other videos to see how you remove the door panel. You might be able to pick up enough here from this footage. It is a few screws and then you lift the door panel basically up and off. Bear with this for another few minutes and you'll see how to do the mirror. Okay, the mirror is up in here. We're going to pull off this piece of plastic carefully. You don't want to rip it. The harness plug is in here. You put your thumb in there. Push that little tab down there and then pull it out. Then an 11 millimeter wrench.
Okay. Take those off. Then there's another clip holding on top. Okay, here's our broken mirror out. There are two designs, one has this second stud in it. This one happens to be that second design but it goes in just fine. The top here has a clip. Okay, put the mirror in. Clip it. Then lock the bolts on. Then these should be tight but not incredibly tight, probably 20 to 25 inch pounds. This one goes in a little further. Okay. We'll plug it in. Do a test. It works well. Now, we'll put the gasket back on and basically what I like to do is do a reference point here, down there and just stick it all along. Now you can put the door panel on. Okay, just like in the beginning, we're going to fast forward through putting our door panel on. You can check out our other videos if you want to see this in real speed. We hope this helps you out. Thank you very much and think of 1AAuto.com for your parts and needs.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that serves you on the internet and in person.
Pop up the trap door in the door pull
Remove the 8mm bolt in the door pull
Pop out the trap door in the door handle
Remove the 8mm bolt from the door handle
Remove the two 6mm bolts on the bottom of the door
Lift the door panel up
Pull the door panel off of the door
Unlock the door handle cable from the plastic trim
Remove the lead ball from the slot in the door handle
Disconnect the power folding mirror switch connector
Disconnect the master window switch connector
2. Removing the Old Mirror
Disconnect the mirror connector
Remove the 11mm bolts from the mirror
Remove the mirror
3. Installing the Tow Mirror
Insert the mirror into the door
Tighten the 11mm bolts
Connect the connector
4. Installing the Door Panel
Connect the master window switch connector
Connect the power folding mirror switch connector
Insert the lead ball to the slot in the door handle
Lock the door handle cable to the plastic trim
Lift the door panel onto the door
Pull the door panel down
Tighten the two 6mm bolts on the bottom of the door
Tighten the 8mm bolt to the door handle
Tighten the 8mm bolt to the door pull
Pop on the trap door in the door handle
Pop on the trap door in the door pull
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
I'm going to use a small flat bladed screwdriver to pop this up. I'm going to use an 8mm socket, an extension, and a ratchet to remove this 8mm bolt. I'll put that aside. I had to wedge a small flat bladed screwdriver in there, because there's no relief to get a screwdriver in. I'll use the other part of my plastic trim tool and get the plastic trim tool under here. Very difficult to remove. You just have to keep working at it. Remove the 8mm bolt. At the bottom of the door, there are two 6mm bolts. Use a 6mm socket, and remove those.
These are actually more like self-tapping screws with a 6mm head. So you can't pull on the door straight out. It has to go up first. You want to lift it up, just like that, and then off of the door panel. We'll reach in here, remove the door handle. You need to unlock this cable from the plastic trim. I'm using some needle nose pliers. Push in on the tabs. I'll push it out and through, and then put the little lead ball that's on the end of it, it's more like a cylinder, but it'll pop right out. I want to unplug the power folding mirror switch. Reach underneath, push the lock in, and pull it down.
Now, I want to do the same for the master window switch. Push in on the lock, and pull this down. Push down on all these locks, now the door panel will come off. The mirror plug is up here behind this plastic. You don't really need to peel it all back. There's a lock in there, I'm going to push it. It might be easier with my other finger, and then pull just like that. And I'll just leave it like that. There are three nuts on the studs holding the mirror to the body. I'm going to use 11-millimeter deep socket and remove them. Put those aside so you can reuse them. It should pull out of the door straight right out.
We have our broken mirror. Here's our original, broken mirror from our vehicle. A brand new towing mirror from 1AAuto.com. It has the same power fold option. This will manual telescope, you have to really push on it. That way it doesn't slide in on you. It's got a turn signal is up here, as opposed to being down here. It also has the memory function for the mirror. And this should fit great and really look great on our vehicle. This new mirror does come with hardware. I'm going to reuse the old ones, and I'll just take these off. Since the old ones are in good shape and they have a wider base, I'm going to use these instead. To feed these wires through the opening, push our mirror in to the door panel. It also helps to have the window down so you can just reach through. Capture one of these so the mirror doesn't fall. Capture the other ones. Now I'm going to tighten these down, kind of bring them in evenly. You can see the mirror getting tight against the door. As soon as I feel them get tight, I'll just go a little turn more. You don't want to over-tighten them and pull the studs out of the plastic, so we'll go a little more just like that. Put our harness back up, plug it in. Stuff that up into the door. That just kind of sat over that.
See these hooks are on the edge of the door panel instead of clips, so just while I hook everything up, I'm going to rest the door panel just like that so I don't have to hold it, and just push it against myself so it doesn't fall backwards, and hook the door release handle cable right here. It's going to push through.
I'm going to reach down and plug in the master window switch. I may have to push the door panel in. Kind of feel for these. Get this one in there. Now, I'm going to put the door panel up, and I push it, and get it hooked in place. You also have to capture this, the door lock little plunger. That can be tricky to line up. Make sure the door's unlocked, because it will make it this much taller and easier to line up. So that's it.
Door panel is hooked to the doorframe. Now I can bolt it back up. Put the bottom self-tapping bolts back in. Install the bolt behind the door handle. Install the bolt in the little door pull area. Install the little trim piece. Snaps down into place. Reinstall the trim that goes behind the door handle. Go this way with it. It snaps into place.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Pull out the harness that goes into the base plate of the mirror
Unplug the brown wire
Plug an end of the red wire to the harness
Run the other end to a turn signal or side marker power source
Install a double barrel crimp connector to the other end
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be talking about setting up the lighting on your upgraded tow mirrors, for a 2007-2014 Ford F150.
Now, the trouble people have been having with this mirror, is when you plug it in, these lights on the outside operate like the puddle light did on your factory mirror, which would mean when you open the door or when you unlock or lock your truck, that little light on the bottom of the mirror that illuminates the ground by the door, turns on. That's going to be how this light functions from the factory.
Fortunately, if you want to change it up, we've made it easy for you to change what powers your lighting. Simply pull out the harness that goes into the base plate of the mirror, and you'll find a brown wire. Unplug this, and, we'll take one of these red wires in the kit included with your mirror.
Using the red wire included with your kit, simply plug this end in, and run the other end to either a turn signal or side marker power source to make the light on your mirror function in the same way. All you need to do is install one of the included double barrel crimp connectors to get that power source connected to here and get your mirror light functioning exactly how you want.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
TR00289
In Stock
Product Reviews
Loading reviews
4.57/ 5.07
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
1
0
Great replacement of existing power fold mirrors but they are tow mirrors.
Jason
June 21, 2016
So after couple years, looking for power fold tow mirrors to replace the manual fold tow mirrors I had, I believe I have found the correct one. If anyone is looking to upgrade your factory, square side mirrors to the power fold mirrors for better blind spot visibility, than this is the one. This particular replacement will work if you have the factory power fold option on your ford truck. The only thing is that most of the mirrors now have whats called a puddle light. where when you exit the vehicle, it lights up the outside. With these mirrors, the puddle light is no more. One good thing is that they have it wired, but its wired to the clearance light. another positive, they put a quick disconnect if you want to wired it with your running lights. Everything is all wired in like the factory except the clearance marker light. But what i did is that instead of running a new wire and wiring it up to the running lights, I took the factory puddle light that is already in the cab and splice
Perfect Fit
E
June 28, 2017
Perfect fit for the truck / had to YouTube the wiring diagram and how to to locate the pin out in the fuse panel to tap into for the running light .. a little time and ran the wires nice and neat .. easy to install .. work great .. just wish the marker lights were a little brighter and the mirror side had a turn indicator for approaching vehicles from the back .. otherwise a perfect ten
Like them but broke
Christopher
July 13, 2017
I like the mirrors. They look amazing but the passenger side mirror stopped working. They were on for a about a week everything worked. The mirrors would tilt side to side, up and down, power fold. But then the passenger one just stopped folding out. It would fold in and then you would have to push it out with your hand and it wouldn't even lock out. So I took that one off and tried it and the driver one worked fine. Put it back on and it made the driver one not work. I emailed 1aauto and they said my truck doesn't come with factory fold out or power mirrors so it will make the mirrors not work properly. I have a 2012 F150 Lariat with power everything. Full package and they say my truck doesn't come with power mirror options and that's why it doesn't work. So I asked if they can just send a new passenger side mirror and a return label for mine but they told me I have to return both mirrors and pay for shipping them if I want the mirrors go buy them again. Cool product just hope it work
Towing mirrors
B
October 9, 2017
Excellent fit.
Called tech support about some small questions.
Very helpful.
Installed in one hour both mirrors.
Easy to install
R
December 9, 2017
Very easy to install. Instructions were precise complete. You will feel great once you finish. Just take your time and keep the video at hand in case you need to review like me. Just test all the connections and operations of mirrors before you install everything back together. I love the mirrors and having a real video to go by.
Upgraded to Towing Mirror's
R
February 24, 2018
The quality of the tow mirror's is on par with OEM. These are high quality mirror's and I have no regrets in upgrading! The available video's were a big help on getting the mirror's installed. Highly recommend!
Awesome product!
D
September 16, 2018
Looks exactly like OEM, functions just like OEM! Fast shipping, took less than an hour to install.
Customer Q&A
Are these mirrors telescoping?April 15, 2016
R I
10
Yes, the ones I purchased are manual pull out. Also, if you are purchasing the ones with the running and turn signal lights you will have to rewire up to the mirror for the running lights to work, the turn signal works great.
April 15, 2016
Brandon E
10
Yes, these are manually telescoping.
April 15, 2016
Derek C
10
Yes they are telescoping but I have not been able to install them yet.
April 19, 2016
David V
Do you have a video of changing the top caps?June 7, 2016
Lonnie P
10
No we do not. They should just pop off and install with a snap.
June 7, 2016
Derek C
Do these mirrors vibrate at all?July 11, 2016
Cliff C
10
not at all. They have a great buffer kinda pad that help cushion against the door. let you know while I am talking to you, if your previous mirrors have a puddle light this is located on the bottom where you open the door it will light up. These mirror have it wired to that pin so all you need to make it work with the clearance light is to find the wire inside the cab that goes to the puddle light and tap the wire to the running lights of your vehicle.
July 11, 2016
Jason N
10
They do a little bit but nothing that will impact your vision, the passenger side seems to have more movement then the drivers side.
July 11, 2016
Brandon E
10
not for me. they are like factory mirrors.
July 11, 2016
Greg W
10
mine dont
July 11, 2016
Bernard S
10
only on the big bumps
June 28, 2017
E D
What is the red wire for? And how would I tell if my truck has the heated mirrors factory installed?July 27, 2017
A J
10
The red wire is for the upgrade to LED turn signals.
July 28, 2017
Alex P
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.