Kit Includes: (1) Passenger Side Fog Light (1) Driver Side Fog Light
Quantity: 2 Piece
Specification
Side Location
Driver & Passenger Side
Product Features
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Fog Light Assemblies 2009-11 Honda Pilot
Created on:
Tools used
Phillips Head Screwdriver
Trim Tool Set
1. Removing the Fog Light Assembly
Use trim tools to pry the fog light bezel
Remove the two Philips head screws
Pull straight out on the fog light
Disconnect the electrical connection
2. Replacing the Fog Light Bulb
Turn the bulb counter clockwise to remove it
Line up the bulb in the new housing
Turn it clockwise to lock it in place
3. Reinstalling the New Fog Light Assembly
Reconnect the electrical connection
Line up the assembly and push it in
Snug up the two Phillips head screws
Install the bezel and press it in
Hi. I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.
In this video we will be replacing the front fog lights in a 2010 Honda Pilot. If you need these parts or other parts for your vehicle, click the link in the description and head over to 1aauto.com.
We're going to take this fog light trim cover off. We're going to use a trim tool. We actually sell these at 1aauto.com in a kit. What we'll do is there's two little areas right here and right here. Go underneath there with your fingers near the lens. You can pull it out. It comes right out. There's all these clips around.
We're going to use a Phillips-head screwdriver to take these two screws out right here. Those two screws out. We can grab the fog light on this side, pull it straight out. There's the connector on the back. Push down on the connector and pull it out.
Here's our old fog light. Here's our new fog light from 1aauto.com. As you can see, the shape is the same. The lens is the same. This is how you adjust it, the screw right there. That's the same. The back side. The mounting holes are all the same. Where the bulb goes in is exactly the same. Get yours at 1aauto.com and you'll be ready to rock and roll.
The new fog light does not come with a bulb. We're going to have to take it out of the old one, so turn this to the left. Take that larger tan. It gets lined up with the larger part in the hole. Push that in, turn it to the right. I'm going to connect the connector to the fog light. Snap it in. You want to pay attention to these two tabs. Those are going to go in here.
Make sure your screw holes are lined up. We're going to put the screws in right here. Before you tighten that one up completely we'll put the other screw in. Make sure the holes line up. You can tighten them both down. Snug it down. Remember, it's plastic, so don't tighten it too much.
I'm going to install our bezel. Align these two tabs up top first and then lock it in.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Product Reviews
Loading reviews
5.00/ 5.03
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Pair of Fog lights for Honda Pilot
M
October 31, 2019
Customer service was very friendly and seemed to genuinely care about my purchase. Order arrived fast. Installed very easy after watching the how-to video. I will definitely be buying from them again
Exactly what we needed
Lena
April 21, 2020
Good product, good price.
Chris
August 28, 2024
Great!
Customer Q&A
Are these CAPA certified, and DFOT approved?November 18, 2020
Joe T
10
Thank you for the inquiry. These lights will be DOT, SAE, and FMVSS Compliant.
November 18, 2020
Curtis L
Hi, are this glass or plastic?June 22, 2021
Cacutoto23 C
10
These lights will be plastic.
June 22, 2021
Jessica D
is this brand new, refurbished, or a used part?September 19, 2021
John D
10
Ours was new but didnt fit our pilot
September 19, 2021
Lena F
10
New
September 19, 2021
CORY B
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Honda is a registered trademark of Honda Motor Co., Ltd. 1A Auto is not affiliated with or sponsored by Honda or Honda Motor Co., Ltd.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.