Replaces
For Factory and Aftermarket TRQ mirrors MRA08129
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hey friends, it's Len here at 1A Auto. Today I'm working on a 2015 Chevy Equinox. We're going to be replacing the mirror. We're going to put in a quality 1A auto part. If you need this part or any other part, you can always check us out at 1AAuto.com. Thanks.
Okay, to get started, we're going to need some basic stuff. We need safety glasses because we're going to be messing with glass, right? We're going to need some hand protection, once again messing with glass. A little bit of tape-- That's going to be precautionary. I'll show you why. Some pliers, you might need these. Small screwdriver. Maybe even one of these. I'll put all that aside for now. I'm going to show you what the tape's for. This is just basically... I'm going to put a little x. And that's just in case the glass pops, it won't shatter and you know... I don't know, do something crazy that glass likes to do when it breaks. Cool? Now I'm just going to take it and push it like that. I'm going to grab on to it and just going to give it a little yank.
There it is. Easy peasy. We didn't break anything, but just in case, we are wearing our safety glasses, right? You can use something like pliers if you want, just try to get these two wires off. These are for the defrost. Okay? Your window motor's right here. Or not window motor, mirror motor. Mirror motor. That sounds weird but whatever. Anyway, so I'm just going to try to get these off. I'm going to give them a little twist, a little pull. See if I can get it. They like to stay on there pretty good. I mean, that's what they're for, right? To help them stay on? They're doing their job.
I'm going to try to use my little pocket screwdriver. One. Two. There we are. Wow! I feel good. All right, so we got that off. There's our wires. We've got our old and our brand new quality 1A Auto part here. So as you can tell, they're the same shape. That's very cool. Got the same backing, right? These right here. Got our little tab. We've got two little extra whatevers. I don't know what they're for, but I'm not going to worry about it. I assume it's probably just part of the defrosting. Okay? So yeah, that's basically what it looks like. Let's go ahead and install it.
I'm going to take my two little wires, take a look at them. They don't look very corroded. If they looked like they were rusted or super corroded, I would probably just try to clean them up the best I can. Maybe a small file or a brush of some sort. They don't look bad at all, so all I'm going to do is I'm just going to connect them in, okay? There's no real order to which way they go. Get it in there. That one on there. Make sure they click in. Give them a little tug so they don't fall off, right? I'm just going to get it lined up. There we are. Now I'm just going to try to push it on. You should hear it click in. Very nice.
Cool. All right. Now I'm going to put the key in the ignition and I'm going to try to turn the mirror and make sure everything functions the way it should. I'll clean it up real nice and this customer will--
All right, here we go. Does its job. Perfect. Let's clean that up real pretty and off it goes.
Thanks for watching. Visit 1AAuto.com, your place for DIY auto repairs, for great parts, great service, and more content.
