Replaces
Frequently bought together
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Highest Quality MaterialsMade from highest quality materials that meet or exceed OEM standards
Quality Tested - built to a strict level of product standards.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
Open your fuel door and remove the two T30 Torx screws securing it to the bed of the truck. Loosen the other three T30 Torx screws around the filler neck. Once the screws are loose you should be able to work the back side of the fuel door around the rubber.
Once the fuel door is removed, use a flat blade screwdriver to pry the spring out of it's hook and then pop it up out of its tabs in the rear here. Slide the spring out of the assembly.
Here we have our old spring and our new part from 1AAuto.com. You can see that the shape is exactly the same, so it's going to fit right in there and make everything move nice. The other thing is you can see we have a coated steel here, which is going to be a lot stronger and more resistant to rust, meaning it will last longer and do what we want it to do. So if your old fuel door spring is broken, rusted out or failed, this new part from 1A Auto will go and direct fit just like our original equipment and fix you up right.
Slide your spring back into the assembly, work it around back into place and back into their slots in the fuel door. You may need your screwdriver to help pry it out here. Once those are in place, push down. This takes a little bit of force so watch yourself, keep your hands out of the way in case the screwdriver slips, you don't want to hurt yourself. Reinstall the fuel door. Line up your two T30 Torx bolts and reinstall them. Tighten up the other T30s you loosened and you're good to go.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
