Replaces
Frequently bought together
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
In this video we're going to show you how to remove and reinstall the taillight, whether you need to replace a broken taillight or you're just looking to replace a bulb. We're working here on a 2003 F250, same as any super duty truck of this era. The only tool you'll need is an 8mm wrench or socket with ratchet.
Okay, pretty straight forward. On the backside here there's two bolts that you need to remove. These bolts are 8mm. Speed it up here as I use an 8mm socket with a ratchet to remove those two bolts. Okay, once you have those bolts out pull down. The bulbs twist counterclockwise to disconnect. To service the bulb just pull it out, push it back in. The same up here. The new taillight from 1A Auto, if your taillight loses a battle with a 2x4 or fire wood, which happens on my truck a lot get a nice new light from 1A Auto. It goes right in. Everything goes right together. There are a couple line-up tabs. You just kind of want to get the bulbs in. Watch those line-up tabs. Get them in place.
Okay, we'll speed it up here as I put those two 8mm bolts back in. When you tighten them up you don't want to over tighten them, because you are just tightening speed screws into plastic, so make them firm but not too tight.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video we're going to be working with our 1998 Ford F150. We're going to show you how to remove and replace your vehicle's tail lights, as well as the tail light bulbs. If you like this video, please click subscribe, we have a ton more information on this and many other vehicles and if you need these parts for your truck you can follow the link down in the description over to 1AAuto.com. Here are the items you'll need for this repair.
Open your tailgate and you can access the two 8 mm screws securing your taillight. Remove those with an 8 mm socket and ratchet. Now you can just pull these taillights out by hand, but they're very prone to breaking the tabs in the back. If you have a plastic trim tool it's a good idea to use that to pry out toward you and remove your taillight.
To change the bulbs, turn the socket counterclockwise. This has some LEDs in it but it's the same as a conventional bulb as far as replacing it. Simply pop it out and install your new one. You can then put the socket back into the taillight and turn it clockwise to lock. There's your brake light. The process for the reverse light is exactly the same: turn counterclockwise, remove the socket, remove the bulb, install your new bulb, reinstall the socket and turn it clockwise to engage.
To remove your taillight assembly lift the tabs, there should be two but our connectors. Ours are a little beat up. The bottom one doesn't have any tabs left on it but they should have two tabs you'd lift and pull off the connector and remove your taillight from the vehicle.
Reconnect the electrical connectors, these are color coded to the correct sockets. They have these little metal tabs that sit into the plastic retainers here. Line those up and pop them in. Reinstall your two 8 mm bolts. These are only plastic thread going in to a plastic hole so just get them snug. There's really no need to crank these down tight, otherwise you risk cracking that retainer and having a loose taillight. Close your tailgate and you're good to go.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Tools used
