Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to replace the A/C and heater blower motor on this 2003 Ford F250, pretty much the same as any '01 to '07 Super Duty. A symptom of the blower going bad is if it starts making a loud groaning or high-pitch squeaking noise. That's when you know your bearings in your motors are going bad and it's going to need replacement. The only tools you'll need are 8 and 10 millimeter sockets with a ratchet and extension.
Your fan motor is right here on the passenger side and you're going to want to remove this junction box here first. Use a 10 millimeter socket on the extension with the ratchet. I'm going to fast forward as I just remove those two 10 millimeter bolts that hold that junction block in. One word of warning, you can see another little junction box right above where I'm working has two red wires going into it. That's a plow relay, this vehicle is equipped for a plow. You want to be careful not to touch any of your tools to those two posts because they are positively charged. The only way to prevent any sparks or anything will be not to touch them or to remove your positive and negative battery cables. Take this and carefully bring it up and out of the way. We're going to retrieve our two bolts.
Right here is the lead, just pull back on that tab, disconnect that. There's also a rubber moisture hose here. Just kind of pull that off. I'm going to use a ratchet and extension and 8 millimeter socket, and get this lower bolt here first. I'm going to fast forward again here as you just removed three 8 millimeter bolts. That's what holds the motor into the housing. There's my motor out. This tube just has a little collar that pulls off.
Here's the motor from 1A Auto. Put this gasket on. I'm going to fast forward as I kind of fumble with that gasket a little bit. It does have large holes on it, make sure those holes are lined up with the holes that the screws go in to. This goes one just like before. Push it in the hole and put the band around, hook it down in. Make sure the little alignment pins go through the holes here. Move the harness out of the way. We'll do some super-duper fast-forwarding here. Make sure you start all three of the fan motor bolts first then tighten them up with your 8 millimeter socket and ratchet and extension, then put the junction block into place and again, make sure that you start both bolts first then tighten them up. Last but not the least, plug it in and then reconnect your vent tube.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
