Replaces

2002 Ford Windstar without Transponder Key Option Ignition Lock Cylinder TRQ ILA41519

$ 49.95

$63.95

22% OFF

$63.95

22% OFF

FREE SAME DAY SHIPPING

Read 9 REVIEWS

ILA41519

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Frequently bought together

2002 Ford Windstar without Transponder Key Option Ignition Lock Cylinder TRQ ILA41519

$49.95

Interior Trim Removal Kit

$29.95

Description

Vehicle Fit

Warranty & Shipping

Specification

Vehicle Ignition System Option

without Transponder Key Option

Item Condition: New

Attention California Customers:

proposition 65 icon WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.

Product Reviews

Loading reviews

4.33/ 5.0

The part did fit my truck the only problem is that the keys were not able to be programmed to my truck because the chip inside the new keys were not compatible with fords security system. So had to take it to a lock Smith so the could re key the new ignition cylinder to fit my existing key to my truck. Ended up costing me another 125 bucks instead of 60 dollar progmaing fee so that was lame. I even called before I ordered and they said everything would work..

Ignition

Perfect, fast, direct fit, and very easy to install. You do have to un program the old keys and re program the new ones. Takes about 15 mins.

Great service!!!!

Had no problem receiving the product shipped very fast and worked like a charm! I high recommend 1aauto.com

Perfect Replacement

Darren

Worked as it should. Easy replace with use of video from A-1 Auto. No need to code if your truck isn't coded.

Michael

I ordered a key cylinder with chip keys I got chip keys that couldnt be programmed.

Basic Ignition, works well, easily replaceable

Easiest ignition that Ive ever had to replace. Replacement works well, no issues at all.

Lock and key cylinder

Excellent product easy to install ,and quick delivery .So far I have been very satisfied with all of the parts I have purchased from 1A auto .Will continue to purchase more products as funds are made available.Thank You

Ignition switch replacement

It was so much easier than I thought. The video helped alot

Ronald

Fit perfect like it should. Easy installation, delivery was fast.

Customer Q&A

Is this a Ignition Lock Cylinder with a chip in the key replacement ?

January 8, 2016

Homer B

Yes, this key will have to be reprogrammed. Thank you and have a great day!

January 8, 2016

Derek C

yes

January 16, 2016

Pedro A

Yes

August 1, 2018

LEw C

How do I program key?

February 7, 2016

Royster M

Hello, Sorry but we do not have the programming details avail for this part. There may be a video available on Youtube or check in the forums for key programming.

February 8, 2016

Brian F

No need. It slid right in.

March 2, 2017

Dennis H

No need. It slid right in.

June 23, 2017

K D

Is this an original Ford part or after market?

March 17, 2018

Joe M

This is an after market part made in Taiwan. I have been using it in my 2005 Ford Ranger for more than a year and it fits and works fine, no problems. However, I did not have to mess with programming the key because the "PATS" security system has been turned off on my vehicle by the previous owner. So on my application any key will work, no programming required. I don't know the exact procedure for key programming.

March 20, 2018

David H

After market part I bought it

March 27, 2018

Wicho G

Great purchase the only downfall is you have too get ford too program it or a locksmith company would be cheaper . Good luck I believe they charge 200 (ford)

November 11, 2018

Vineshia R

I need the ignition and door locks to match anybody know the part number I need?

April 6, 2018

Kristi R

Call a-1 and they can tell you

December 5, 2018

J A

Does this work for 2001ford 150 Tristan v8? And how do you program key?

March 3, 2019

Bernadette B

This is able to fit for your vehicle. The part will need to be programmed through the dealership.

March 3, 2019

Emma F

I have a 2002 Ford Ranger Edge 4.0 enginge does this ingnition lock cylinder come with the transponder keys?

May 30, 2019

Michael T

May 30, 2019

D M

The transponder keys are not included in this kit.

May 30, 2019

Emma F

Yes. Make sure you look over the description of the one you need.

May 30, 2019

B Y

Yes,

May 31, 2019

Norberto J

It does but it's not the right chip inside of the key. I used the cylinder and had them re key it

June 1, 2019

A M

Can you replace the 2002 Ford Ranger ignition cylinder switch with one that doesn't need to be programmed?

July 30, 2019

Brian H

You would want to keep those items the same as the factory set up. Thanks!

July 30, 2019

Adam G

Have a 2001 ford ranger need key and cylinder, what do I do about the programming new set?

October 3, 2019

Carlos B

Thank you for your inquiry. Unfortunately, we do not have the programming details available for this part. There may be a video available on Youtube or check in the forums for key programming. We're constantly adding new installation video instructions. If we do not have one for your vehicle on the product listing page, please check again at a later time or check our Video Library to see similar repairs here: https://www.1aauto.com/videos Thank you!

October 4, 2019

Jessica D

how do you get keys programed?

February 25, 2020

Billy T

my switch was on a '99 7.3 diesel dually and there was no programming. It was very easy to switch out. In the long run though it turned out that I had a clearance light water leak that allowed water to corrode the fuse block below the driver's door post and I would not have had to change the switch.

February 25, 2020

Donald G

Dealer, locksmith or a good smart mechanic with a computer program.

February 25, 2020

S O

Thanks for your inquiry. Written and video installation instructions are found on the product page under the "How-To & Tools" tab. We're constantly adding new installation video instructions. If we do not have one for your vehicle on the product listing page, please check again at a later time or check our Video Library to see similar repairs here: https://www.1aauto.com/videos

February 25, 2020

Emma F

AFTER REPLACING THE IGNITION LOCK CYLINDER MY TRUCK WOULD NOT RECOGNIZE IT. ALSO THE THEFT LIGHT ON MY DASH WILL NOT TURN OFF. WHAT DO I DO?

December 31, 2020

THOMAS S

The key needs to be programed to that vehicle. We do have that information on our listing mentioning that.

January 4, 2021

Corey M

My truck is a 7.3 manuel. Will this be the correct part? Since you have to the push that little button to turn the key back towards you to get it out

June 16, 2021

Mary J

Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.

June 16, 2021

Emma F

Hello. Does this ignition switch come with a chipped key that needs to be programmed. Is it oem? Thank you.

April 7, 2023

Gaspar G

No. the part is not a chipped key and does not need to be programmed. There is an installation video on our listing that may help.

April 7, 2023

Andra M