Replaces
Replaces Chevrolet Cobalt HHR Pontiac G5 Front & Rear 12 Piece Steering & Suspension Kit TRQ PSA56185
$440.95
Replaces Chevrolet Cobalt HHR Pontiac G5 Front 8 Piece Steering & Suspension Kit TRQ PSA63469
$399.95
Replaces Chevrolet HHR Malibu Steel Wheel 4 Piece Set Dorman OE Solutions 1AWHK00135
$363.95
Replaces Chevrolet HHR Front Ceramic Performance Brake Pad & Rotor Kit with Performance Calipers & Hoses TRQ Performance BKA33810
$305.95
Replaces Chevrolet HHR Front Semi-Metallic Performance Brake Pad & Rotor Kit with Calipers TRQ Performance BKA52125
$289.95
Replaces Chevrolet HHR Front Ceramic Performance Brake Pad & Rotor Kit with Calipers & Hoses TRQ Performance BKA34351
$284.95
Replaces Chevrolet HHR Front Semi-Metallic Performance Brake Pad & Rotor Kit with Calipers & Hoses TRQ Performance BKA34352
$281.95
Replaces Chevrolet Pontiac 6 Piece Steering, Suspension, & Drivetrain Kit TRQ PSA63548
$280.95
Replaces Chevrolet HHR Front Ceramic Brake Pad & Rotor Kit with Calipers & Hoses TRQ BKA29381
$279.95
Replaces Chevrolet HHR Front Semi-Metallic Brake Pad & Rotor Kit with Calipers & Hoses TRQ BKA29382
$277.95
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the power window switch on the rear door of this 2011 Chevy Silverado 1500. It's pretty simple procedure. The only tool that you're going to need is a flat blade screwdriver.
We're using a pry tool or a flat blade screwdriver. Just pry up the power window switch. Then, the harness is just a tab. Press it in and pull the harness free. Now, using a flat blade screwdriver, you want to pry the two clips on either side of the switch so you can separate it from this panel.
Now, you want to take your new one and push it into place and reconnect the harness and push the switch back down into the door. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
If you have good fingernails, sometimes you can just pull up and off on that. You could also use a trim tool available at 1AAuto.com. Put underneath, and pull straight up. Make sure you pull up on the front. Somebody was not that careful on this one, and you can see they actually broke off the tab on the trim.
Then you'll want to disconnect your power window switch, just a little tab here. Pull and disconnect, and remove your old switch. The plastic trim tool is the best tool. Pry out one side, press with your thumb down, and push and release the clamps, and it comes out.
The replacement switch from 1A Auto goes right in, clicks in place.
Reconnect the switch. Feed the harness down in. Make sure you put this in correctly.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
