2011 Chevrolet HHR Rear Driver & Passenger Side Power Window Switch 2 Piece Set DIY Solutions BSS01611
recommended installation videos
sponsored by
Out of Stock
$38.95
Notify When Available
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Part Details
Kit Includes: (1) Rear Driver Side Power Window Switch (1) Rear Passenger Side Power Window Switch
Quantity: 2 Piece Set
Specification
Side Location
Driver & Passenger Side
Location
Rear
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Highest Quality Materials
Made from highest quality materials that meet or exceed OEM standards
Quality Tested - built to a strict level of product standards.
Item Condition:New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How To Replace Rear Window Switch 2007-13 Chevy Silverado
How to Replace Rear Window Switch 2007-13 Chevy Suburban
Created on:
Tools used
Flat Blade Screwdriver
1. Disconnecting the Switch Panel
Pry up the switch panel with a flat blade screwdriver
Disconnect the window switch wiring harness
2. Remove the Window Switch
Pry out the switch from the panel with a flat blade screwdriver
3. Installing the New Window Switch
Push the switch to the switch panel
4. Connect the Switch Panel
Connect the window wiring harness
Push the switch panel in place
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the power window switch on the rear door of this 2011 Chevy Silverado 1500. It's pretty simple procedure. The only tool that you're going to need is a flat blade screwdriver.
We're using a pry tool or a flat blade screwdriver. Just pry up the power window switch. Then, the harness is just a tab. Press it in and pull the harness free. Now, using a flat blade screwdriver, you want to pry the two clips on either side of the switch so you can separate it from this panel.
Now, you want to take your new one and push it into place and reconnect the harness and push the switch back down into the door. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Flat Blade Screwdriver
Trim Tool Set
1. Removing the Window Switch
Pry up the master switch panel with a trim tool
Disconnect the wiring harnesses
Press the switch out of the trim
2. Installing the Window Switch
Click the switch into the trim
Connect the wiring harnesses
Press the master switch panel into the door panel
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
If you have good fingernails, sometimes you can just pull up and off on that. You could also use a trim tool available at 1AAuto.com. Put underneath, and pull straight up. Make sure you pull up on the front. Somebody was not that careful on this one, and you can see they actually broke off the tab on the trim.
Then you'll want to disconnect your power window switch, just a little tab here. Pull and disconnect, and remove your old switch. The plastic trim tool is the best tool. Pry out one side, press with your thumb down, and push and release the clamps, and it comes out.
The replacement switch from 1A Auto goes right in, clicks in place.
Reconnect the switch. Feed the harness down in. Make sure you put this in correctly.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Product Reviews
Loading reviews
5.00/ 5.018
18 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
18
0
0
0
0
Decent replacements.
Hiram
April 26, 2022
Worked as advertised. With the help of youtube, took less than 20 minutes to swap out.
1A Auto is great!
Mark
June 10, 2022
Super easy install, parts fit perfectly and works great!
Chheng
July 24, 2022
It fix both of my car and good service
Ladislado
August 19, 2022
Fit really good
Lucas
September 28, 2022
Work great like oem no issues
Victor
October 18, 2022
This was the first time I had ordered anything from you and the experience was "SUPER"! I am so happy I ordered the set of two. I replaced one only for the other to go out a week later.
Because of the experience I ordered two front struts for my wife's 2011 Chevy Traverse and I am waiting for them to arrive.
Semper Fi Vic Puentes
James
January 5, 2023
works great
Great Product with Great Fit
Jim
May 20, 2023
These switches fit and worked perfectly. Installation is very quick with just a screwdriver (or two) needed.
Richard
June 1, 2023
Such an easy fix! It was completed in under 5 minutes.
Perfect fit
don
September 9, 2023
Perfect fit easy installation.
Install one and check the opposite side before replacing it as well. Videos are good.
David
December 9, 2023
I bought these a few years ago, and one of them at least stopped working. I don't know if these are wired in parallel or not, but when I replaced one side with a new switch, the other side worked as well. So I bought two, but only used one. I don't know if this is a problem with the past switches that I bought from this company or whether it's my car's electrical system. I like having the video of how to install the parts I get from this company.
Jason
December 22, 2023
They work super well and look a little different from the factory GM ones but they still look like OEM quality and work super well. First time buying and really good.
Reko
March 19, 2024
Awesome
Perfect fit
Steve
May 24, 2024
Fit perfect, works perfect.
Great parts Great people
Kendall
May 25, 2024
Perfect and function can't beat the warranty fast shipping look to 1A auto first ??????????
Very impressed
James
July 25, 2024
Thanks, we're perfect
Gregory
September 19, 2024
The right part with the right fit at the right price. Completely satisifed!
Easy Fix
Patrick
November 14, 2024
Super easy to install and now my windows go up and down like they are supposed to. I am very happy with the product.
Customer Q&A
Would these switches also fit on an extended cab model?July 31, 2021
Tyler E
10
These will not fit on the extended cab.
August 3, 2021
Andra M
(2013 GMC sierra 2500 crew cab, rear pass window) cannot unplug the switch, not like in the video, it looks different. There is a clip that slides up, but I still cannot unplug the switch. The numbers on my switch are "22895546 SANAD3825C 3272 E1 MEXOctober 26, 2022
Troy E
10
Yes, this part will fit your vehicle.
October 26, 2022
Kelly S
BSS01611 Will this also fit in just a extended cab, not the crewcab?November 11, 2022
BRIAN S
10
This part will not fit your vehicle, but we may have a part that is listed to fit.
Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
November 11, 2022
Kelly S
Does this switch work for a 2013 chevy traverse front passengers side?July 25, 2023
John D
10
No, these switches are only for the rear. Part number 22895545 is for the front passenger side.
July 27, 2023
Andra M
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.