Replaces
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace an exterior door handle on this 2002 Suzuki XL-7. We show you on the driver's door, but the other three doors are a similar procedure. The items you'll need for this are a new exterior door handle from 1AAuto.com, a Phillips screwdriver, a flat blade screwdriver, and a 10 mm socket and ratchet.
Start off by prying off your switch panel. Then, push the tab on the harnesses and pull them free. Next, remove the Phillips screw in the door handle and the other one down in the pull handle. Now pull your door handle out, and pry this clip off the door handle rod. Then, pry the rod up and out of the door handle. Pull off this triangular panel. Now, pry out along the edges of the door panel to release the clips and then lift the door panel up and off the lock rod.
Pull down the top corner of your water shield and flip up this clip and pull the door handle rod out of the door handle. You may need to use a flat blade screwdriver to pry it out. Then remove these two 10mm Phillips bolts. We do that using a 10mm socket and ratchet, but you could also use a Phillips screwdriver. As they're removed, the door handle pulls off.
Up front, is the old exterior door handle. Behind it, is the new one from 1A Auto. You can see they're identical, and they're going to mount exactly the same. Push your new door handle into place. Then replace those two 10mm Phillips bolts. Push your door handle rod back into place and reclip it. Then replace that water shield.
Now, to replace the door panel, push your harnesses through the door panel, and put the door panel down over the door lock and into the window sill. Next, hit in the clips around the edges of the door panel. Put the rod back into the door handle and reclip it. Replace those two Phillips screws. Reconnect the harnesses to your switch panel, and push it back down into place, and replace that triangular panel, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
