2004 Toyota 4Runner Rear Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55972

This part should be very easy to install, but there is a slight design flaw that makes it rather difficult. It looks to be two nuts that need to come off to remove and replace with the new part. The top portion with the two bushings comes off and goes on easily because it doesn't spin, but the bottom portion spins with removing and or installing the new nut. The problem is there is hardly anything to grip an hold the spinning portion in place while you're tightening the nut. First of all it is round an it is very narrow, and it is covered by a small portion of the rubber dust cover and round clip that holds the dust cover in place. So as you're trying to grip it with a pair of narrow vice grips, you're shooting for a very narrow piece of metal to grab onto, approximately the width of a quarter, then you have to deal with some of the rubber dust cover that overlaps it which definitely will not hold with vise grips as it is in between. I think if the rubber dust cover did not overlap on

Had these installed on my 2006 Sport Edition. Mechanic had zero issue installing them.

I recently purchased the 1ASFK04392 Toyota Lexus Rear Driver & Passenger Side 2 Piece Sway Bar links, and I'm extremely satisfied with their performance. The build quality is impressive, providing enhanced stability and a noticeable improvement in handling. Installation was straightforward, making it a hassle-free upgrade. These sway bar links have significantly reduced body roll, contributing to a smoother and more controlled driving experience. Overall, a reliable and effective product that delivers on its promises. Highly recommended for those looking to enhance their vehicle's suspension performance.