TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Direct Bolt-on Replacement: No modifications or special tools required
Complete Assembly: includes same mirror glass, housing, bracket and technology as the original unit
DOT Certified: Built to the highest quality standards
FMVSS-111 Compliant: Validated to be a dealership alternative
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Product Wiring Guide - Power Folding Mirror 2007-16 Toyota Tundra Sequoia
Created on:
Tools used
Gloves
1. Power Fold Feature Connections Explained
Take a red wire from the module
Strip the end and insert it into a butt connector leading to the add a fuse circuit
Remove a factory 5 amp fuse (such as the cigarette lighter light)
Attach the black wire/ground to a rust-free clean bolt on bare metal underneath the dash
Connect the green connector to the switch
If you do not have factory power fold, peel the backing from the base plate on the mirror
Pull out the white and yellow connector that connects to the factory harness
Disconnect the white and yellow connector from blue and purple connectors
Run the white and yellow connector through the opening in the shield
Connect the white and yellow connector to the small powerfold feature harness
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
Here we have our upgraded tow mirror for the 2008 to '16 Toyota Sequoias, as well as the 2007 to 2016 Toyota Tundras. Now we understand there's been some confusion as to how you hook up the power fold feature in vehicles that were not equipped with factory power fold. To make it clear, we're going to show you exactly where this harness connects into your mirror as well as where you should be expecting to make these other connections to hook up your aftermarket power fold feature.
This red wire will be stripped and installed into this butt connector here, which leads to our add a fuse circuit here—which will remove a factory five amp or higher fuse from your fuse panel. We recommend something like your cigarette lighter, that will only work with the vehicle's power on. You will remove that fuse. Install this and install the fuse you removed into this open terminal here, while this will supply power to the switch. This black wire will be attached to a rust free clean bolt on bare metal somewhere underneath your dashboard to ground this switch to the chassis.
The green connector will connect into your switch, which you'll cut a hole and mount into your dash. Now if your vehicle did not have the factory power fold, this connection needs to be tapped into the mirror. This is where a lot of people have been having trouble. What you have to do is peel the backing here off the base plate of the mirror. Down where your connector is that your factory wiring harness will plug into. Inside you'll find this white and yellow connector here going into the connector for your factory harness.
This is looped from the factory to make sure if your vehicle had factory power fold that this option is plug and play. However, for those of you watching this video, to add this feature to your vehicle, you want to disconnect this connector, run it through the small opening and this shielding, lay the backing back into place and connect the appropriate side of the harness included with your kit to that connection. If everything is hooked up correctly, this will allow the power fold function to work off of the aftermarket switch and harness included in your kit.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
MRA08279
In Stock
Product Reviews
Loading reviews
4.62/ 5.013
13 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
11
1
0
0
1
Mirror firs perfectly
Elaine
February 5, 2017
Shipping charges to Alaska were very expensive but the mirror works perfectly.
Perfect!
B
November 9, 2017
Mirror had all of the features of the original mirror and works perfectly! The dealer wanted almost 500.00 for a replacement, so this saved me a lot of money!
Awsome
S
May 4, 2018
Great product,fast shipping and very competitive prices. Product was as advertised. I recommend shopping here.
Great Part, Great Price, Great Shipping!
Eric
July 8, 2018
I was going to the buy my mirror replacement from the dealership and it would have been $900 for the part and installation - I looked on here and it was the same part for $185.95 and brand new!
I experienced fast ordering and delivery! Couldn't be happier with my experience and will definitely buy all my other parts here! Thanks 1AAuto!
Looks & Fits great!
Robert
October 30, 2018
needed to replace the driver's side mirror on my 2008 Toyota Sequoia and the cost was going to be over $800 for the mirror alone from Toyota. Thankfully, i found this mirror at 1A Auto. It was only $169. It came on time, it looks great and was really easy to install, had it switched out in less than 15 minutes.
Great service
Jahmil
December 14, 2018
My wife broke my driver's side mirror on garage door. I was able to get the identical mirror and was able to install it myself in 15 minutes. Thank you 1a auto great Service and delivery time was great.
Good Product
A
March 7, 2019
Good product!
Good service!
Thanks!
Aftermarket part does just fine
Alan
April 7, 2019
Perfect alternative to a factory part. Toyota wanted $645 for the mirror assembly. Less than $200 made this deal a no brainer. The texture of the black trim is slightly different but is not noticeable unless you're looking for it.
Driver side mirror
Fredrick
April 18, 2019
Very Im press with the service they delivered what I ordered in a timely manner it was packaged securely no damages to my item they take pride in their products
Delivery was right on time
B
December 27, 2020
I had setup a mechanic to install and the product came in right on time.
Great replacement
R
January 13, 2021
Was a little hesitant going aftermarket, but do not fear. An excellent replacement at a third of the price of OEM. Plug and play wire connection. Weight, build and materials seem the same as the original.Very happy I saved the money.
lasted only a few months
Ryan
March 1, 2022
the mirror seemed fine when initially installed, however, it was a bit clunky and noisy in operation. As of this morning, 3/1/22, it stopped working. Please advise how to best remedy this.
Very Satisfied
Marc
December 24, 2023
OEM quality! Shipped fast. Love the fact that 1a Auto provides install videos on YouTube. Very helpful!
Customer Q&A
Is it the real authentic mirror or not?July 20, 2018
Ezequiel A
10
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
July 20, 2018
Peter L
10
No but close to it.
July 20, 2018
Thomas R
10
I installed this mirror on a 2007 tundra and it worked great
July 21, 2018
Lisa M
10
It is the correct part, yes, but the texture on the black trim is slightly different than the factory's. Considering the price difference of almost $500 between the two, that is insignificant.
April 7, 2019
Alan B
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.