1ASSP00763-2004-05 Ford Explorer Mercury Mountaineer Front & Rear 4 Piece Strut & Spring Assembly Set

Replaces

2004-05 Ford Explorer Mercury Mountaineer Front & Rear 4 Piece Strut & Spring Assembly Set TRQ SCA57101

1ASSP00763

Part Details

  • Set Quantity: 4 Piece

This part replaces:

  • Monroe 181322
  • Monroe 181398
  • Monroe 171322
  • Monroe 171398
  • KYB SR4051
  • KYB SR4082
  • OE # 1L2Z5560BA
  • OE # 1L2Z18125BA
  • OE # 3U2Z18124PAA
  • OE # 4L2Z5310CA
  • OE # 1L2Z18125EB
FREE SAME DAY SHIPPING
Save 28%
List: $452.95 Save: $128.00
Part 1ASSP00763
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: SCA57101

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Set Quantity:   4 Piece

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:40)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Disconnecting the Strut (1:06)
    • Apply rust penetrant to the strut mount nuts
    • Pry out the inner fender clips with a flat blade screwdriver
    • Pull off the inner fender
    • Remove the three 13mm nuts from the strut mount
    • Remove the 21mm bolt from the bottom of the strut
  3. step : Removing the Sway Bar Link (3:35)
    • Apply rust penetrant to the sway bar link
    • Turn the sway bar link with a 16mm socket and ratchet
    • Remove the 15mm nut from the top of the sway bar link
    • Hold the sway bar link sleeve with vise grip pliers
    • Loosen the sway bar link from the bottom with a 16mm socket and ratchet
    • Push out the sway bar link with a hammer and punch
  4. step : Removing the Strut (5:29)
    • Apply rust penetrant to the lower strut nut
    • Hold the strut bolt with an 18mm wrench
    • Remove the 21mm nut from the wheel knuckle
    • Loosen the two 21mm nuts that hold the control arm to the frame
    • Lift the wheel knuckle up
    • Pull the strut down and out
  5. step : Installing the Strut (6:41)
    • Lift the strut into place
    • Start the three 13mm nuts onto the strut mount
    • Turn the bottom of the strut to line up the bolt hole with the control arm
    • Push the 21mm bolt into the bottom of the strut
    • Push the 18mm bolt into the wheel knuckle
    • Fasten the nut onto the strut bolt
    • Tighten the strut bolt and nut
    • Fasten the nut onto the wheel knuckle bolt
    • Tighten the wheel knuckle bolt and nut
    • Tighten the three 13mm nuts on the strut mount to 20-25 foot-pounds of torque
  6. step : Installing the Sway Bar Link (8:44)
    • Put a washer on the sway bar link
    • Put a bushing on the sway bar link
    • Slide the sway bar link through the control arm
    • Put a bushing on the sway bar link
    • Put a washer on the sway bar link
    • Put the sleeve onto the sway bar link
    • Put a washer on the sway bar link
    • Put a bushing on the sway bar link
    • Slide the sway bar link through the sway bar
    • Put a bushing on the sway bar link
    • Put a washer on the sway bar link
    • Fasten the 15mm nut onto the sway bar link
  7. step : Tightening the Suspension Parts (9:30)
    • Support the suspension at ride height with a jack
    • Tighten the sway bar link nut to compress the bushings
    • Tighten the two bolts that hold the control arm to the frame to 110 foot-pounds
    • Tighten the wheel knuckle bolt to 110 foot-pounds
    • Put the inner fender into place
    • Push the plastic clips into the inner fender
  8. step : Reattaching the Wheel (10:39)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers
  • Wire Cutters

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket
  • 16mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 16mm Wrench
  • 18mm Wrench


Fits the following Makes:

Year Make Model Description
2004-2005Ford Explorer Ford Explorer Front & Rear 4 Piece Strut & Spring Assembly Set
2004-2005Mercury Mountaineer Mercury Mountaineer Front & Rear 4 Piece Strut & Spring Assembly Set

Part Interchange

Brand Label Part Number
Gabriel G57018
KYB SR4051
KYB SR4082
KYB Shocks & Struts SR4051
KYB Shocks & Struts SR4082
Monroe 171398
Monroe 171322
Monroe 181398
Monroe 181322
Monroe Shocks & Struts 181322
Monroe Shocks & Struts 181398
Monroe Shocks & Struts 171322
Monroe Shocks & Struts 171398
Unity Automotive 11200
Unity Automotive 15060

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: SCA57101
Product Reviews
5.00/ 5.0 3
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
First time buyer/life time buyer
April 3, 2018
Not only were the parts top quality but the how to videos made the work very easy. I would and do recommend 1A Auto to everyone now. Thank you 1A Auto
March 22, 2020
i woulde like to take the time and say i am very satifiees with my shocks@springs on my wifes 2004 exp
Strut assembly
August 25, 2020
This product fit perfect. I didnt need to modify anything. Make sure you know what side is the left and right before installing.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What is the weight for the entire set? (Freight forwarding to Alaska)
June 12, 2017
10
The estimated weight for these items would be 90 pounds shipped in two separate shipping labels.
June 12, 2017
What brand are the struts and springs ?
December 28, 2017
10
We have a few different aftermarket companies based in either China or Taiwan build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please dont hesitate to ask.
December 28, 2017
Will this set fit an 05 Lincoln aviator?
May 14, 2019
10
This item is not able to fit for your model vehicle.
May 14, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


2004-05 Ford Explorer Mercury Mountaineer Front & Rear 4 Piece Strut & Spring Assembly Set TRQ SCA57101-1ASSP00763 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.