Replaces
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, I'm going to show you how to service the small corner lights. These are the small round lights in front of the front wheels down lower on the bumper fascia. At 1A Auto, we sell replacement ones if one gets broken or damaged. Also, I'll show you how to service them if you're just looking to change a bulb or something. It's pretty much the same for any '04 to '08 Maxima. The only tools you'll need are a Phillips screwdriver and an 8mm wrench.
Underneath, in front of the wheels are two Phillips screws. You'll want to remove those. You can pull this back. You can see the back of your side light. It's a little hard to film, but there's the connection right here. There's a tab on the outside. Pull that tab and disconnect it. Then your bolts to hold the light: there's one here and there's one further in. You need an 8mm wrench.
Unfortunately, the only thing that can get in there is an 8mm wrench. It's just a matter of pulling those back. Once you get the bolts started, they actually come out by hand. I'm just going to fast-forward here as I reach in there, loosen up, and then remove the other bolt. Once you have the bolts out, you've got to go right in the center of the light, and pinch two tabs and push out. Then the light comes out. Let's do that socket side. Just to show you how to put it back together here, these are the two tabs, so you're reaching back in there and pinching those to pull it apart.
In my opinion, it's a lot easier to pull this bulb out. You pull the bulb from the socket here. It's a lot easier to do it this way, a couple of extra steps, but trying to fish this. When that is actually inside of this, it makes it pretty difficult, especially with the angle to try and get that out when it's all in the bumper. Hold the socket in here. You want to have the hole where the bulb goes right at the bottom.
Just work it right in. Pop it together. Once it's together, it pretty much clips itself. I just need to start these bolts in. I'm going to fast-forward here, as you really can't see what I'm doing, so I'll just tell you what I'm doing. You put the bolts in by hand first. You basically can tighten them up most of the way by hand. Then use the 8mm wrench to tighten them up nice and firm. As we slow down, I will be plugging the harness in. Push you fender back up and in. Then replace those two Phillips screws, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
