Replaces
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi. I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.
In this video we will be replacing the front fog lights in a 2010 Honda Pilot. If you need these parts or other parts for your vehicle, click the link in the description and head over to 1aauto.com.
We're going to take this fog light trim cover off. We're going to use a trim tool. We actually sell these at 1aauto.com in a kit. What we'll do is there's two little areas right here and right here. Go underneath there with your fingers near the lens. You can pull it out. It comes right out. There's all these clips around.
We're going to use a Phillips-head screwdriver to take these two screws out right here. Those two screws out. We can grab the fog light on this side, pull it straight out. There's the connector on the back. Push down on the connector and pull it out.
Here's our old fog light. Here's our new fog light from 1aauto.com. As you can see, the shape is the same. The lens is the same. This is how you adjust it, the screw right there. That's the same. The back side. The mounting holes are all the same. Where the bulb goes in is exactly the same. Get yours at 1aauto.com and you'll be ready to rock and roll.
The new fog light does not come with a bulb. We're going to have to take it out of the old one, so turn this to the left. Take that larger tan. It gets lined up with the larger part in the hole. Push that in, turn it to the right. I'm going to connect the connector to the fog light. Snap it in. You want to pay attention to these two tabs. Those are going to go in here.
Make sure your screw holes are lined up. We're going to put the screws in right here. Before you tighten that one up completely we'll put the other screw in. Make sure the holes line up. You can tighten them both down. Snug it down. Remember, it's plastic, so don't tighten it too much.
I'm going to install our bezel. Align these two tabs up top first and then lock it in.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
