Replaces
Part Details
TRQ ignition coils will have your engine running like new. TRQ ignition coils are manufactured to precise specifications using premium raw materials to optimize each vehicle's ignition system. To ensure peak performance, TRQ recommends replacing ignition coils in sets to prevent electrical output imbalances. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an ignition coil on this 2012 Chevy Traverse, with the 3.6 liter V6 engine. The items you'll need for this is a new ignition coil from 1AAuto.com, and a 10mm socket and ratchet with an extension.
Start off by removing your oil fill cap. Then lift up on your engine cover, and pull it off. Then replace your oil fill cap. Now because this is a V6 engine, you have three ignition coils on this side. Then you have another three back here on this side. And we're going to show you on one of the ones up front, so it's easier to explain the process. You just push the tab on the harness and pull it free. Then, using a 10mm socket and ratchet, just remove that 10mm bolt. Then pull the ignition coil up and out.
On the right is the old one, on the left is the new one from 1A Auto. You can see they are identical, and will mount exactly the same.
Push your new ignition coil down into place. Then replace that 10mm bolt and tighten it up. Now re-connect your harness, and remove your oil fill cap. You want to line up these holes with these three studs. Just push the engine cover down into place. Then replace that oil fill cap. Then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
