Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
To replace this fog light, it will be the same on both sides. You just have to pull this grille out of the bumper. It takes a good amount of force. Might have to use two hands. Kind of reach your fingers in here and give it a good strong pull. It will pop right out. Put that aside.
There's two T25 Torx bolts holding this in: one here and one here. Just going to use a Torx bit on the end of this extension and ratchet. Remove this one. Remove the other one. Pull the fog light lens straight out. Just slide this little tab out from behind the bumper and unplug it. Just kind of push these together and then unlock it.
Pull it apart. Change the bulb after we unplug it. Just turn it counterclockwise. Pull it out of the housing.
Here's the original, here's our brand new one from 1A Auto. You can see it's got the same style mounting and this little tab piece. This one actually came with a bulb installed. This lens is nice and clear, and this one's all pitted and dirty from driving down the road. This will fit great and really help with seeing at night.
Just going to plug it back in. Feed the harness back in. This tab is going to go into this little opening here. Slide that right back there. Reinstall these Torx screws. Just tighten them a little bit, you don't have to kill them. Do the same for the other one.
Reinstall the grille. Two tabs here are going to slide into the bumper there and this clips along the edge. Get those started, and then push it into place. It'll click in. Fog light is replaced.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
