WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Jack Pads 1997-2006 BMW 325 Xi
Created on:
Tools used
Hammer
Plastic Fastener Remover
1. Removing the Jack Pads
Pry out the push pin retainer from the center of the pad
Pry out the pad
2. Installing the Jack Pads
Insert the jack pad into the body of the vehicle
Insert the push pin retainer
Tap the push pin retainer in with a hammer
What's up, guys? I'm Andy from 1A Auto. In this video I'm going to show you how to replace this jack pad on this 2001 BMW 325Xi. If you need this part or other parts for your vehicle, click the link in the description and head over to 1AAuto.com.
All right, we're going to remove the mount that's located right here. We're raising the vehicle from this position right here, that's where you would lift it. You can do this on the ground though. So there's that one there, there's another one right here, and then two on this side, all four corners. I'm going to use this trim tool, we actually sell this trim tool at 1AAuto.com. There's a little pin right there. I'm going to slide that pin out, and just slide that pin out. Should be able to get it underneath the mount, and slide it out.
Here's the old jack pad, here's the new jack pad from 1AAuto.com, it's got the same shape, comes with a pin. Flip it over, it's got the same backing, a little rubber seal right there, same locking mechanism. Get yours at 1AAuto.com, you can do it yourself. Now, I just take the new jack pad, line that up, push it up there, take the pin. The pin's started. Then you take a little hammer, give it a little tap. There you go.
Thanks for watching. Visit 1AAuto.com for quality auto parts shipped to your door, the place for DIY auto repair. If you enjoyed this video, please click the Subscribe button.
BDA30827
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
BMW is a registered trademark of Bayerische Motoren Werke AG. 1A Auto is not affiliated with or sponsored by BMW or Bayerische Motoren Werke AG.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.