Replaces
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the tailgate handle bezel on this 2011 Chevy Silverado 1500. Sometimes these bezels just crack or break. It's a pretty simple replacement. The only tools that you're going to need for this is a Phillips screwdriver and a 13 millimeter socket and ratchet, as well as a flat-blade screwdriver.
Using a Phillips screwdriver you want to remove these ten Phillips head bolts that line this tailgate panel, and also you want to remove these two 13 millimeter bolts here. We'll just fast-forward as he removes all of these. Now, with all of those removed, you can remove that tailgate panel, and then you just want to remove this one 13 millimeter bolt right here.
Once that's removed, you want to put your tailgate up. Now you want to stick a flat-blade screwdriver behind the bezel and just pry it out. It should come right off.
To install your new one, you just want to put the handle up inside the bezel. You want to run the lock through the square on the handle, and then just push that bezel into place. On the other side of the tailgate, you want to replace that 13-millimeter bolt. Now you want to take your tailgate panel and put that back into place. We'll fast-forward as he replaces the 10 Phillips head bolts and the two 13 millimeter bolts.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
