2003 Chevrolet Tahoe with Rear Disc Brakes Rear Brake Rotor Backing Plate 2 Piece Set Dorman OE Solutions 1ABMK00056

The parts were a perfect fit. The installation video was invaluable and saved me $400 from the garage estimated price. You cant beat that!&

This 2 piece backing plate is made really good and you do not need to pull the axle to install it. This does not come with instructions but 1A Auto has a video on you tube and on there site. You do have to work the two pieces together but make sure the rubber that comes with it mounts between the backing plate and the emergency brake housing, it seals the emergency brake housing, this does not go on the outside of backing plate and dorman will not tell you that. I would recommend this for anybody that needs a new backing plate.

I'm sure glad they made this in two parts. With my other vehicle I had to pull the axle out. The part is of top quality.

GREAT Idea! These were a magnificient time saver, and I didn't know what I was going to do when I replaced my disc-brake pads on the rear and my old ones just crumbled at the slightest touch. Were super easy to put on, ONCE I sprayed the bolts down w/penatrater a couple times.THANKS for an EXCELLENT product!

My first time working on brakes and I had planned a full replacement for rear rotors and pads. When I got into the job I found the original backing plates almost entirely gone from rust. I ordered these backing plates and as is usual with 1AAUTO they were shipped promptly. As far as this product is concerned it is a good replacement for the OEM backing plate. My originals came out in pieces and these do the job and are easier to install, just be patient as they are a little tricky. From a durability standpoint these will go the way the others did being made of steel and subjected to midwestern winters and salt, sand, etc on the roads. I'm not sure how long they were expected to last, my Tahoe is a 2003 and they were all but gone. One word of caution: there is a mistake in the installation video that made me a little crazy. There is a bracket that is held on by an 8mm bolt. True to form, I didn't look at it closely when I removed it. When it came time to reinstall it I reviewed the

Items were well packaged and quickly shipped. The two piece version is ingenious, much easier than pulling the axle. This made my brake job much easier! Thanks!

Just by their nature, these are a pain to replace, but it would be a much bigger job if they were not in two pieces. Perfect fit!

Great quality fit perfect would recommend this product

One of those projects that just becomes more work than one would hope for. The backing plates definitely fixed the problem of no emergency brake it's was way easier with the split backing plates

Great product and easy to install.