Kit Includes: (1) Passenger Side Mirror (1) Driver Side Mirror
Adjustment Type: Electric
Specification
Side Location
Driver & Passenger Side
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Direct Bolt-on Replacement: No modifications for an easy install
DOT Certified: Built to the highest quality standards
Complies with federal safety standard FMVSS-111
Matching set for a renewed appearance
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Mirror 2000-02 GMC Yukon
How to Properly Install Side View Mirror Glass
How to Replace Side Mirror 2002-06 Chevy Suburban
Created on:
Tools used
Socket Extensions
10mm Socket
Ratchet
1. Remove the old side mirror
Pry off the corner trim on the inside of the door.
Unplug the wiring harness.
Unbolt the three 10 mm bolts using your socket and ratchet.
2. Install the new side mirror
Mount the side mirror and bolt into place.
Plug in the wiring harness.
Clip on the corner trim.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1aauto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video we will be showing you how to replace the side view mirror on this 2003 Yukon. Pretty much the same for any 2000 to 2003 GM SUV, Yukon, Tahoe, or Suburban. Also, '99 to '03 Chevy or GMC Truck. The only tool you will need is a 10 mm socket with a ratchet and extension.
We are replacing the mirror on this '03 Yukon. It has the short harness, which means you don't have to take the door panel off so it's actually really easy. Just carefully work your hand in behind, gently pull on this corner trim. There's just two clips right here. Pull this insulation out. Here's your harness. Pull it down and there's your connection right there, which if you pry up with your thumb here and then pull and undo the connector and then it's three 10 mm bolts. You need a socket and ratchet. You probably could use a wrench too. They're pretty accessible. You definitely don't need this long of an extension, it just kind of happened to be the first one I grabbed. Unbolt it. Be careful as you're working these bolts or these nuts off as you don't want to drop them down into the door.
As I take this last one off I'm going to support this mirror because I don't really want broken glass all over my garage. This is actually the old clip here that holds it. Pull the mirror off. You can see this one was damaged. A 1A Auto mirror looks exactly the same. This truck happens to be black so the black is going to match. If you wanted to match it to your truck, if your truck is red or blue or whatever, what you can do is you can either get like a matching of ... a pretty good matching can of spray paint. Or, if you're particular, you can go to an automotive part store that has a paint department. They can use your vin or your color code, match the paint, mix some paint for you, put it into an air-charged can, and you can repaint this yourself.
Our mirror doesn't have that little clip. Some people call them bolts. The original ones will work so I'm going to use those. It's not like the nice, big washers. So we are going to put this on. Taking the bolts it came with off. Put it right in. Get the studs to come through. Push it on the outside. It looks good. Careful with these bolts, make sure you don't drop them into the door. This is probably the most awkward one here.
Now when you tighten these, you want to get it nice and snug but you don't want to be crazy tight. This is a plastic mirror so you don't want to break the base or anything. Okay, plug in the plug there. Put it up in there. Put the insulation back in. Do a little test and it's on good. The car's got tail light. Tail light's working. Okay, we are in good shape.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free at 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Cloth Rags
1. Installing the Mirror Glass
Line up the mirror glass clips with the mirror cover rim
Use a rag to push in the center of the glass and make sure the glass clicks into place
Hi. I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.
What's up, guys? I'm Andy from 1A Auto. If you recently replaced your mirror glass and you're getting a distorted or a funhouse look in the glass, I'm going to show you what causes that and how to property install the mirror glass.
So on the back of the mirror glass there's all these clips, right here. And those are going to clip all around this ring here, and then there's also these little spacers right here that go in between here. So if you're installing this mirror glass, all those clips have to be pressed all the way on to this retainer, and if you're installing it you're holding the glass like this. When installing it, you push it on from the outside. You're not going to get all those clips installed.
So, when those clips are not completely installed and the mirror is bowed like that. That's what gives you that funhouse look.
All right, with the new mirror you're going to make sure that this gasket is in there if your mirror comes with one. Make sure none of the old gasket is on this mounting bracket here. We want to line this up right with that to make sure that goes on securely and make sure those clips get lined up in there. Make sure the wires are out of the way if your mirror has wires. You're going to take a rag and push in the center of the glass, and you're going to make sure it clips in. And you can push it pretty hard just be careful.
And your mirror should be installed properly and you should not have that funhouse look or that distorted look. You should be good to go.
Thanks for watching. Visit us at 1aauto.com for quality auto parts, fast and free shipping and the best customer service in the industry.
Tools used
Flat Blade Screwdriver
10mm Socket
Ratchet
1. Removing the Side View Mirror
Pry off the mirror base trim piece by hand
Remove the foam pad
Disconnect the mirror wiring harness with a flat blade screwdriver
Remove the three 10mm nuts from the base of the side view mirror
Pull the mirror free
2. Installing the Mirror Cap
Pry off the top of the cap with a flat blade screwdriver
Pull off the mirror cap by hand
Align and push in the new cap
3. Installing the New Side View Mirror
Feed the harness and studs from the side view mirror through the door
Replace and tighten the 10mm nuts preliminarily
Tighten the 10mm nuts onto the side view mirror
Connect the mirror wiring harness
Reinsert the foam pad
Push the triangular panel back in place
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a side mirror on this 2002 Chevy Suburban. We'll show you on the driver's side, but the passenger's side is a similar procedure. It's the same part and similar process on these Suburbans from 2000 to 2006. The items you'll need for this include a new side mirror from 1AAuto.com and a 10mm socket and ratchet.
Start off by prying off this triangular panel, then remove the insulation foam, pry off on this tab, and just pull this harness free. Remove these three 10mm nuts. Now push in these tabs on the center and just pull the mirror out.
On the right is the old side mirror; on the left is the new one from 1A Auto. If the cap on the back of your old mirror is still intact, you can take that off and put it onto your new mirror, or you can take the cap with your new mirror to an auto-parts store in the paint department, get the matching paint, and spray paint it to match. At 1A Auto, we also offer tow mirrors which will mount exactly the same as the regular mirrors with no additional brackets needed.
Then pry off the cap if you're going to replace your cap. You just want to pry from the top a little bit until you can get your hand back underneath it and then just pull out. Now, to put these caps into place on your mirror, you just line up those tabs and push it straight into place. Take your new mirror and feed the harness back through the door and push those studs into place.
Once you get those center tabs lined up, just push the mirror straight in and then replace those three 10 mm nuts. Reconnect your harness, tuck it back into the door, replace that foam, and then replace that triangular panel. Just push the bottom in first, line up the tabs, and push it back into place. Just to show you what the tow mirrors look like, this is from the front, here's from the back.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
MRA09653
In Stock
Product Reviews
Loading reviews
4.55/ 5.022
22 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
15
5
1
1
0
Excellent service and Product
John
February 1, 2017
I'm not much of a car guy, and have been driving a pickup with duct taped mirrors for awhile, I came upon your website, watched the installation video, looked at my pickup and thought this is something I can do myself, the mirrors came quickly after my order, installation went perfectly!! I will also be reordering a mirror for my daughters car, that a shop quoted her over $200 to fix!!
Fit good
Jon
October 20, 2017
They fit right in place. Only thing is that they don't have the center clip like the factory ones do.
Baltazar
December 16, 2017
Very please with the product and service ,it got here well pack and on time will look forward to buy more parts from tjem
Happy reflections
J
January 10, 2018
I have to say i am very happy with these mirrors. easy install, i had replaced them once a few years ago with other mirrors from a different company. Not happy then. Those mirrors did not move all the way by control and the glass shook alot. But not with these. they hold steady, and i get full range of motion.
Direct fit mirrors
R
November 9, 2018
These mirrors are exactly as described. Look factory and fit perfectly. Allow for easy install. I would recommend these to everyone.
As good as OEM!
Eugene
January 12, 2019
I purchased this pair of mirrors to replace my OEM power mirrors. They install in minutes with a 10mm socket and screw driver. Both look and work flawlessly. The nice black finish looks so much better than my factory chrome, which had faded significantly. Im really happy with this purchase.
2001 gmc mirrors
J
April 18, 2020
They were nice looking out of the box and were easy to install ! I like them very much and will be ordering from 1A Auto again for sure for future repairs on MTV good ol truck!!!
Excellent
Rogelio
August 11, 2020
Good quality part fits as oem
Side mirrors
M
August 22, 2020
Bought these mirrors for half the price than they were at local parts store.
Truck mirrors
Kenneth
October 16, 2020
Mirrors are working great, no problems so far and they look great on the truck.
Perfect fitment!
L
December 15, 2020
I will be buying from A1 Auto again if all the reproduction products they sell are as good as this purchase. Could not be happier with these side view mirrors. I also love the A1 Auto tutorial videos on You Tube. So very helpful. Thank You, Les S
Great mirrors
Kevin
December 21, 2020
I bought these mirrors as a gift for my son`s pickup. They were a perfect match and the install was super easy. The quality of these replacement mirrors is top notch. No more zip tied mirrors for him anymore !
Quick and easy
Frank
April 30, 2021
Quick and easy to install. Driver side mirror vibrates. Passenger side is solid.
Mirrors
Michael-
May 29, 2021
I got exactly what I ordered. Shipping was fast. A1 auto is great
Awesome Mirrors
Joshua
August 4, 2021
Great Mirrors. Came with no scratches and no broken parts. Install took 10 mins tops to install, very easy. Only con is the do shake a bit while driving, besides that, fantastic mirrors!!
Serves the purpose
connie
August 29, 2021
Good fit
Perfect Fit for my 2002 GMC Sierra
Michelle
September 8, 2021
Perfect fit for my 2002 GMC Sierra and were easy to install.
They look very good and function well, although they do shake while driving so it does make it a little annoying.
tony
August 17, 2022
Got parts back very quickly! Everything fit great and 100% satisfied!!
Mirror shakes
craig
October 1, 2022
Drivers mirror shakes excessively. Passenger side is fine.
Luis
October 13, 2024
Good condition out the box. Nice fit like original.
Customer Q&A
All I need is one can I go to get one?May 6, 2021
Demetrio- M
10
Part number 1AMRE01841 is for the driver side mirror only and part number 1AMRE01842 is for the passenger side only.
May 6, 2021
Jessica D
All I need is one can I go to get one?May 6, 2021
Demetrio- M
10
The individual sku's for the left and right hand side are 1AMRE01842 & 1AMRE01841.
May 6, 2021
Andra M
What company do you use for shipping?June 29, 2021
Bob A
10
UPS and USPS.
June 29, 2021
Andra M
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.