Replaces

2004 Chevrolet Blazer V6 4.3L 8th Vin Digit X Distributor TRQ EDA64959

$ 52.06

$103.95

50% OFF

$103.95

50% OFF

FREE SAME DAY SHIPPING

Read 22 REVIEWS

EDA64959

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Get the kit

2 Piece Ignition Kit

$74.45

Product Reviews

Loading reviews

4.59/ 5.0

distributor

kenneth

perfect fit perfect price thanks xxxxxxxxxxxxxxxxxxxxxxx

Distributor

Alan

Very happy with distributor for my 2001 Chevy Blazer

very happy

mike

would highly recommend this distributor. great price.Better than what was pictured .Had truck set TDC, went right in ,no problem. Truck runs great. thanks A1 Auto

Works like a charm.

Chad

This part is much better built than the plastic OEM. I would recommend this to anyone.

Distributor replacement

Distributor looked good , copper cap & rotor. Truck started right up. The only thing I didnt like was its made in China ??

Distributor works great

shannon

Order the whole distributor since it was only a few more dollars to get the whole thing instead of just the rotor and cap. My mechanic said it fit like a charm. Of course it needed a little adjustment but what doesn't right? I love 1auto and I will always continue to order my guaranteed to fit parts from you guys. Thank you for the excellent service on my other orders that I ordered the same day!

2001 Chevrolet Blazer Distributor

Mark

Great quality replacement distributor made in China...it fit right in & my Blazer runs like new! Quick delivery too!

Perfect Fit

Dan

Perfect fit ! Lined up the timing marks on pulley took Distributor cap off to see mark on the Distributor and pulled the old one out and the new one went right in . Got everything hooked up and truck fired right up. This Distributor is made of better materials than the OEM one. Will definitely check at 1AAuto next time I need parts

Distributor

John

The part is excellent still working today and arrived in perfect condition

4.3l v6 distributor

Right part first time. Great customer service the whole time. Will call them whenever I need parts first.

2001 GMC Sierra distributor

Oscar

Distributor is fixed

Wouldn't fit my 4.3

Good quality however the timing gear would not mesh with oil pump shaft .

Starter up...

Again another part and another job well done!! Thank you great parts and price well always continue to purchase though your company!!!!

Restored performance

Great addition to a complete tune up, and much better quality than the OEM part. Excellent tech support for installation when I had questions. I would highly recommend this upgrade part.

Better design than OEM

Robert

This is the third distributor for my 4.3L Vortec V6. The last two OEM distributors were fine with fit and electrical performance, but given time had two annoying problems. First, the threads that are supposed to accept screws that hold the cap and rotor in place are plastic for the cap and cheap thin metal for the rotor... very easily strip out causing slop. Secondly, the drive shaft starts wobbling over time causing more slop. I am confident that the cap is secure on this TRQ unit and will revise my rating after some time has passed. So far is an improvement over the original distributor in my educated view!

Jason

So far so good. My old distributors gear stripped causing me to get out of time. The only thing with this one was the blade that turns the oil pump was wider making it harder to seat. But it did seat.

Distributor EDA64959

Clint

I'm very disappointed with this distributor. It is not aluminum. Shaft is plastic. It wouldn't seat properly. It's very misleading to say that this distributor is made out of aluminum.

A great replacement distributor

Tycowin

I was really impressed with the EDA64659 distributor I bought for my 2001 Chevy blazer performance came back immediately and gas mileage. This is a very good product.

Worked perfect.

Jack

Perfect fit, easily installed.

Cheapest route if you need a cam sensor, cap in rotor

Levi

Great replacement for 02 Sonoma 4.3. Great value for distributor, rotor, cap, and Cam sensor all in one. There was excess plastic flash on the rotor cap. Easily fixed with a razor knife.

Fit perfectly

John

Fit perfect and easy installation truck running a lot better

Time for a new distributor

Mitchell

I had been putting off buying a distributor for my Blazer for quite some time. The price and free shipping was better than Rock Auto. I was worried about the unit body being made of plastic, but it appears to be of some durable resin. The screw treads are beefed up with bronze inserts. The rest of the unit appears to be made with above grade components. Switch out was easy. Truck runs great.

Customer Q&A

is the shaft and base plastic ?

December 31, 2017

Ruben G

no it is all metal ...good distributer

December 31, 2017

Alex L

No its metal

January 3, 2018

R I

Aluminum body, steel shaft.

January 3, 2018

Carey S

No, the base is cast aluminum and the shaft sleeve is machined aluminum

January 3, 2018

Randall-D M

January 3, 2018

K E

No not plastic. Shaft is steel,base is aluminum

January 4, 2018

John K

No both are high quality metal, install on both my personal trucks.

January 4, 2018

V A

Do all the timing marks align with the reluctor wheel for the camshaft censor correctly?

January 14, 2018

Rick R

Thanks for your question! These items will install correctly in the vehicle they are listed for. Thanks!!

January 16, 2018

Adam G

Yes

July 23, 2019

J O

yes

September 19, 2019

Jose R

Yes took a little more work but got everything lined up and in

January 28, 2021

B T

Where is the stationary bolt down in the picture?

November 5, 2019

Ernest C

The hold down is a separate clamp and bolt on the intake manifold. It clamps down upon the circular flange pictured just above the gasket. The distributor is clamped in place after the timing is set. Hope this helps..

November 5, 2019

David P

Thank you for your inquiry! That would be the hold down clamp, which is a separate part. You will have to reuse your original.

November 5, 2019

T I

Can i put a shaft distributer in a 2014 silverado 4.3 ? Does engine have the teeth in it to turn the shaft distriutor

November 21, 2019

Robert E

Currently, we do not carry this part for your vehicle. We're always updating our inventory so please check back soon! If you have any other questions, let us know. Modifications such as this we are unable to assist with.

November 22, 2019

Curtis L

Will this distributor fit 2003 S10 4.3?

March 3, 2023

Michael C

Yes it does

March 3, 2023

Edmundo E

This part will not fit your vehicle, but we may have a part that is listed to fit. Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.

March 3, 2023

Ricale A