Kit Includes: (1) Passenger Side Mirror (1) Driver Side Mirror
Mirror Memory Type: Without Memory
Adjustment Type: Electric
Specification
Side Location
Driver & Passenger Side
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Direct Bolt-on Replacement: No modifications for an easy install
DOT Certified: Built to the highest quality standards
Complies with federal safety standard FMVSS-111
Matching set for a renewed appearance
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Mirror 2006-13 Chevy Impala
Created on:
Tools used
Socket Extensions
Flat Blade Screwdriver
T30 Driver
8mm Socket
10mm Socket
Ratchet
Needle nose pliers
1. Removing the Door Panel
Pull back the door handle and pry out the small panel behind it.
Pry out the panel in the door pull cup.
Pry off the reflector.
Remove the 8mm bolt behind the reflector.
Remove the three uncovered T30 bolts.
Pry out the triangular panel at the top of the door panel.
Pry out the clips around the door panel.
Lift the door panel up and off.
Pinch the tabs and release the door handle cable.
Disconnect the harness.
2. Removing the Side Mirror
Cut the tape that holds the mirror harness to the clip in the door.
Disconnect the mirror harness.
Remove the three 10mm nuts that secure the mirror.
Pull the mirror out and off.
3. Replacing the Side Mirror
Feed the harness down through the door.
Line up the mirror and push it into place.
Replace the three 10mm nuts.
Reattach the harness to the clip in the door.
Reconnect the harness.
4. Replacing the Door Panel
Reconnect the door handle cable.
Reconnect the harness.
Line up the door panel down over the lock knob.
Hit the clips in around the edge of the door panel.
Replace the three T30 bolts.
Replace the 8mm bolt.
Replace the triangular trim panel.
Replace the small trim panels behind the door handle and pull cup.
Replace the reflector.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Don from 1A Auto. I hope this how to video helps you out, and the next time you need a part for your vehicle think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace a mirror assembly on this 2006 Chevy Impala. Pretty much the same for a 2006 to 2011 Impala. We're going to show you the driver side; passenger side is the same procedure. Tools you'll need are, you'll need a new mirror or mirrors from 1AAuto.com, small flat blade screw driver, 8 and 10 mm sockets, ratchet and extension, a T30 Torx driver, and a pair of pliers.
Start by pulling up on a door handle and there's a little panel that you just use a small screw driver to pop out and that kind of pries right out and there's another small panel at your door pull that pulls up and out. Using the same small screw driver pry out on the reflector at the bottom corner. We'll fast forward here. Behind where you took the reflector off there is a 8 mm screw to remove and then there are 3 T30 Torx screws, 2 of them are at the door pull and then one of them is behind where the door handle, the inside door handle is. Remove all 3 of those. Use a small flat blade screw driver or some other flat tool to carefully pry on the triangle at the top of the door. Starting at a top front corner, pull firmly and you'll start to release the clips. You just slide your hand in all the way around and keep pulling the door panel until it's free from the door. Once the clips are on their outer perimeter free then you can pull the door panel up off the window ledge and out some more.
Now, using a pair of pliers, there's little tabs on the cable housing; pinch the tabs and pull the cable housing through the back side of the door handle and then pull the cable up and out. Then there is a lock; you pull the white part of the lock back which unlocks the connector and then you can pull the connector free and take the panel off. Here we're using a razor blade to just to cut the tape that holds the harness to the clip and then pull back a little tab and disconnect the mirror harness. Now, pretty simply, there are 3 bolts that hold the mirror. They're fairly easy, they're 10 mm bolts; remove those. Now remove the mirror from the car.
Okay, old mirror on the right and new mirror from 1A Auto on the left. You can see the connectors are exactly the same, kind of plug in and install the same. As we circle around, you can see that the mirror from our vehicle was painted gray to match body color. Obviously you can install the mirror just in black and it will be a functional replacement. You could be as crude as just going to a hardware store buying a can of spray paint that is a close match and spraying the mirror that way. If you wanted a better match, you can go to an automotive part store that has a paint department; they can help you match the color of your vehicle, put paint in an air charged spray can, and you can respray the mirror yourself.
Now to install the new mirror, it's a reverse of the procedure. Feed the harness through and pull it through carefully; make sure not to pinch or strip any of the wires or anything. Then work the studs in to place and start the bolts on. After you get those on, you want to tighten them up nice and firm, but don't over tighten them. Use some electrical tape or even plastic wire ties and secure the harness to the clip in the door, and then reconnect your harness. To reinstall the door panel, bring it close to the door. Reengage the ball into the door handle and then snap then snap the cable housing in place. Now reach down in and reconnect your harness. You push the 2 connectors together and then flip the white clip up and over to lock it in place. Now, be sure to line up the door lock hole with the door lock knob and then push the door panel down on to the window sill, make sure it goes on there correctly, and then set the clips around the outside edge.
Now reinstall the 3 T30 Torx screws, one in behind the door handle and then the 2 behind the door pull. Then once you have those done, reinstall the 8 mm bolt or screw that goes in behind the reflector on the back of the door. Finish up by reinstalling the triangle trim piece up on the top, the little trim piece that goes in behind your door handle, the trim piece that goes in to the door pull cup, and finally the reflector on the back side.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacements parts and the best service on the internet. Please feel free to call us toll-free 888-844-3393. We're the company that's here for you on the internet and in person.
MRA09159
In Stock
Product Reviews
Loading reviews
5.00/ 5.013
13 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
13
0
0
0
0
Perfect Fit
Aristeo
August 21, 2017
I only actually needed one side mirror but since my car was a different color, I decided to go with the set since it was only about $20 more. Was not disappointed and it looks great. I would recommend getting.
very happy
F
February 1, 2018
I loved the replacement mirror's that I purchased they went on perfect and I got them in before I expected to get them fast shipping. I am very pleased. thank you.
Satisfied Customer
Daniel
February 6, 2018
Got both mirrors and installed them easily. However, the video says the bolt behind the door reflector is 8mm, it is actually 7mm so you will want to get the right tool for this bolt. Both mirrors look great and I am very happy with the purchase.
summary
Ilona
October 24, 2018
I love dealing with 1A. Always receive fast service. I installed the tail lite myself. It was a piece of cake. My husband insists I wait for him to install the 2 mirrors. All you have to do is review the installation videos and you're set to go. I have even talked my son into using 1A. I recommend this business to everyone I know.
Thank you 1A for your fast and courteous service.
Ilona Kistemaker
mirrors
Darryl
December 31, 2018
I don't have any problem with any thing I get from you every thing fits good
Best bang for the buck!!!
M
October 26, 2019
Cost to have the dealership replace the mirrors on my wife's 06 Impala would have cost me well over 300.00 dollars, 1aauto saved me 200.00 and it was pretty easy to do myself.
Mark D.
Repeat customer
Perfect Replacements
Luis
December 10, 2019
Definitely were a perfect replacement for my 2012 Impala suffered a damaged passenger mirror. Replaced them both and was back on the road within 2 hours.
Mirror Set for 2012 Impala LTZ
J
February 4, 2020
I am very pleased with the mirror set. It was shipped and received in a timely manner. Packaging was very good no damage. Properly installed in about 25 minutes. They fit great looks like factory equipment. Operates smooth and easy.
Shawn
October 13, 2021
Works great
Impala mirrors
Merrill
November 8, 2021
The mirrors were exact replacements. I checked the size with the original mirrors and they were the same. I did the work myself. These are black n the original was red. I saved over $500 dollars verses having a dealer do it. I can look at black mirrors for the savings. Thanks 1A Auto.
Harry
March 7, 2023
As described
Very Good
Gary
July 30, 2023
These items were as described and works great. I always get the right part with 1a.
Great product!
Jerry
October 24, 2024
Product works well for the application.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.