Replaces
Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the hood supports on this 2005 Ford Excursion. It's the same process on these excursions from 2000 to 2005. We show you on the driver's side, but it's the same procedure on the passenger's side. And the items you'll need for this includes new hood supports from 1AAuto.com and a flat blade screwdriver. You want something or someone to safely secure the hood while you're doing this procedure.
The hood supports are held on with these clips on the top and the bottom, and you just pry out with the clip, and pull the support from the studs. And make sure you have something or someone holding the hood when you do this. Now the support pulls free.
Up top is the old hood support; below it is the new one from 1A Auto. You can see they're identical, and they'll fit exactly the same. Push the support on until it clicks, and we always recommend you do these in pairs.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
