Kit Includes: (1) 3/8 in. to 1/2 in. Drive Adapter
Specifications:
Remove & install serrated type plastic fuel tank retaining rings that hold the pump module inside the tank
Adjusts to grip rings from 3" to 7 1/4"
Item Condition:New
Wear and Tear
This item is backed by a 60-day warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Fuel Tank Retaining Ring Tool - Available at 1A Auto
Fuel Tank Retaining Ring Tool - Available at 1A Auto
Created on:
Tools used
No Tools Needed
1. No instructions needed
No instructions needed
Hey, friends. It's Len here at 1A Auto.
Today I want to show you something super cool. I want to show you a fuel tank retaining ring tool. This is adjustable, and it's super neat because a lot of times when you're doing a fuel pump on a vehicle, you have your gas tank down on the floor, you're ready to get your fuel pump out of there, but you've got this plastic ring on there. And you try to grab it, you try to twist it and you're trying all these sorts of things. Maybe even a little punch with a little hammer, bonk, bonk, bonk. And it just won't break free, right? Because all you're getting is one side, and your hand strength just can't break it free. That's why we sell this tool right here.
It's got these little prongs, okay. And it's got this. These go into the slots right here, and they can adjust around where that ring is, and they grab right onto the lips. You tighten them down once they're adjusted to where you need them. And then the center hole right here is a three-eighths ratchet, or you can use this adapter and use a half inch ratchet if you need something a little lengthier or girthier to grip onto.
So this is going to give you a lot more leverage to get that ring off, which a lot of times is really stubborn. People have a hard time with it. You can go ahead down to 1aauto.com and scoop up this tool, no problem. Easy peasy.
Thanks for watching. Visit 1aauto.com, your place for DIY auto repairs, for great parts, great service, and more content.
Tools used
No Tools Needed
1. No instructions needed
No instructions needed
Hey, friends. It's Len here at 1A Auto.
Today I want to show you something super cool. I want to show you a fuel tank retaining ring tool. This is adjustable, and it's super neat because a lot of times when you're doing a fuel pump on a vehicle, you have your gas tank down on the floor, you're ready to get your fuel pump out of there, but you've got this plastic ring on there. And you try to grab it, you try to twist it and you're trying all these sorts of things. Maybe even a little punch with a little hammer, bonk, bonk, bonk. And it just won't break free, right? Because all you're getting is one side, and your hand strength just can't break it free. That's why we sell this tool right here.
It's got these little prongs, okay. And it's got this. These go into the slots right here, and they can adjust around where that ring is, and they grab right onto the lips. You tighten them down once they're adjusted to where you need them. And then the center hole right here is a three-eighths ratchet, or you can use this adapter and use a half inch ratchet if you need something a little lengthier or girthier to grip onto.
So this is going to give you a lot more leverage to get that ring off, which a lot of times is really stubborn. People have a hard time with it. You can go ahead down to 1aauto.com and scoop up this tool, no problem. Easy peasy.
Thanks for watching. Visit 1aauto.com, your place for DIY auto repairs, for great parts, great service, and more content.
W80668
In Stock
Product Reviews
Loading reviews
4.31/ 5.013
13 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
10
1
0
0
2
Junk with a capital J
J
September 25, 2019
Worst piece of Chinese junk, you could possibly buy. It was bent, had numerous sharp burrs, and did not fit the locking ring it was intended for. Everything was chrome plated even the bad burrs. Buyer beware of this item, it is useless.
Nice tool
S
September 29, 2019
Makes the job just that much easier fits many applications.
It works
Terry
December 22, 2019
It's a bit fiddly, the twist socket likes to unseat instead of pulling the whole tool away from the job and the slides need a good tightening or they will wobble, but it worked just fine for the job ('00 Corolla).
Ring
Jason
April 25, 2020
Did the job works well
Cameron
June 16, 2020
I've used this on a few of our vehicles being the family mechanic. It's never let me down.
Right tool
David
February 21, 2022
Glad I bought the wrench, that old fuel pump cap was on tight, and being plastic, I wouldn't have wanted to damage it getting it off. Had to put on the breaker bar and use gentle taps with the mallet to get it to break loose. But eventually started spinning and ring was not damaged for re-use.
Rene
December 21, 2022
Poor
Simple tool
Amy
February 20, 2023
Simple, well made tool. Does the job
Great value and it works!
Mark
August 19, 2023
Works as expected. Makes installing a new fuel pump much easier.
Pedro
November 10, 2023
It was great
Bob
February 18, 2024
Works great
Fuel Pump Lock Ring Tool
Victor
April 2, 2024
I was concerned about possibly having to use a hammer and chisel to remove the lock ring. The lock ring tool worked extremely well. Loosening and tightening the nut with this professional tool makes that part of the job a breeze.
Great tool to have on hand
Robert
July 21, 2024
It made the job easy.
Customer Q&A
does it come with the gasket? didn't see it listed yet a single gasket is not available to purchase from your websiteFebruary 18, 2019
Ramon P
10
This item will not include a gasket nor do we offer it. The original gasket will need to be used or a new one would need to be sourced locally.
February 18, 2019
Jessica D
Can it be used to remove fuel vent canister?May 18, 2019
Gilbert M
10
This is specifically designed for the fuel pump lock ring.
May 19, 2019
A C
Will this work for a 2009 Nissan Murano?May 24, 2020
Raymond K
10
don’t know
May 24, 2020
T N
10
Hello,
If the fuel module in your vehilce is mounted with a lock ring this tool can be used to remove it to remove the fuel module. Thanks!
May 24, 2020
Adam G
can i find a fuel pump for Isuzu Vitara grand 2006 , 6 cylinders ?January 27, 2021
Mr Andherson L
10
Currently, we do not carry this part for your vehicle. We're always updating our inventory so please check back soon!
January 28, 2021
Emma F
will this fit a 1999 cadillac seville sls?November 3, 2021
Vickie D
10
This is a universal tool. It will work if you need this tool with a 3/8" socket drive.
November 3, 2021
Andra M
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.