Replaces

1990 Acura Legend Front Driver & Passenger Side Steering Rack & Pinion Bellow 2 Piece Set TRQ PSA42529

86-93 Integra; 86-90 Legend; 82-93 Acrd; 88-91 Civic; 83-91 Prelude Rack & Pinion Bellow Kit LF = RF

$ 34.95

$48.95

29% OFF

$48.95

29% OFF

FREE SAME DAY SHIPPING

Read 1 REVIEWS

PSA42529

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Description

Vehicle Fit

Warranty & Shipping

Part Details

Quantity: 2 Piece Set
Kit Includes: (2) Front Steering Rack & Pinion Bellows

Specification

Side Location

Driver & Passenger Side

Location

Front

Item Condition: New

Attention California Customers:

proposition 65 icon WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.

Product Reviews

Loading reviews

4.00/ 5.0

1991 honda crx si, driver side boot install a pain!

[{"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/a750a3ecb00b7d71b0fb8ddfeb0c3523_1680116396935_0.jpeg", "caption": "Driver side OEM boot compared to boot. OEM opening on large end is 6-7 mm bigger."}, {"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/8d4caba7f05ee5e6962542bde63face5_1680116644105_0.jpeg", "caption": "passenger size OEM boot compared to 1aauto boot. OEM opening on large end is smaller by 5 mm."}]

Raul

I installed this in a 1991 Honda CRX Si. The original OEM boots have different sizes for the driver side (left side) and passenger side (right side). The old boot measurement on the driver side (left side) is 46-47 mm diameter for the large hole side measured from the inner opening. The equivalent measuring points on the PSA42529 large hole side is 40 mm diameter. So, there is a 6-7 mm difference between the OEM and the 3rd party boot. This made it very difficult to install on to the steering rack. I was able to finally attach it by using a small screwdriver to stretch the boot opening around the rack end. As for the passenger side (right side), the old boot measured 35 mm diameter measured from the inner opening of the large hole end. The 3rd party 1aauto PSA42529 part also measured 40 mm diameter. So, the old boot had a smaller opening and thus made the 3rd party boot install much easier. I gave it 5 stars for the passenger side, 3 stars for the driver side, which averages

Customer Q&A

No questions have been asked about this item.