1ABDS00378-Honda Civic FIT Insight Rear Driver & Passenger Side 2 Piece Brake Drum Set


Honda Civic FIT Insight Rear Driver & Passenger Side 2 Piece Brake Drum Set TRQ

Part 1ABDS00378
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: BRA75099

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Set Quantity:   2 Piece

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:44)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Shoes (0:59)
    • Strike the rotor/brake drum with a hammer if it will not come off
    • Remove the rotor/brake drum
    • Remove the two brake shoe springs with the vise grip pliers
    • Twist off the front retaining spring with the vise grip pliers
    • Hold the retaining pin in place by hand
    • Pry off the brake retainer with a flat blade screwdriver and turn it off the pin
    • Remove the brake shoe
    • Remove the retainer pin
    • Repeat the process for the other side, letting the rear shoe hang on the e-brake
    • Remove the adjustor
    • Rotate the e-brake shoe with vice-grips
    • Push the brake shoe off the e-brake
  3. step : Removing the E-brake Spreader (3:27)
    • Wedge the horseshoe clip off with a flat blade screwdriver OR
    • Pry the horseshoe clip off with pliers
    • Remove the washer
    • Remove the e-brake spreader
  4. step : Reinstalling the E-brake Spreader (4:35)
    • Insert the retaining pin into the brake shoe
    • Lay the e-brake spreader over the pin
    • Insert the washer over the spreader
    • Insert the horseshoe clip into the groove
    • Clamp the horseshoe clip with pliers
  5. step : Installing the New Brake Shoes (5:11)
    • Secure the end of your e-brake cable with vise grip pliers
    • Push the spring back with the hook on the e-brake spreader
    • Hook the lower brake spring into the shoe brake
    • Insert the retainer pin in the back
    • Insert the retainer clip over the pin
    • Press the retainer clip into place
    • Press the clip down and rotate the pin to keep it in place
    • Hook the spring into the remaining pad underneath the tab
    • Repeat the process for the other side
    • Spin the star wheel on the adjustor so it's clamped together
    • Insert the adjustor into place with the longest leg facing you
    • Insert the adjustor arm into place
    • Hook the retainer spring to the brake shoes
    • Adjust out your brake shoes by turning the star wheel up with a flat blade screwdriver
    • Insert the brake drum/rotor into place
    • Turn the brake drum slightly so you can feel light contact
  6. step : Reattaching the Wheel (8:33)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts to 80 foot-pounds in a crossing or star pattern
  7. step : Testing the Brakes (8:45)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Chisel
  • Hammer
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket

Fits the following Makes:

Year Make Model Description
2001-2005Honda Civic Honda Civic L4 1.7L Rear Driver & Passenger Side 2 Piece Brake Drum Set
2009-2010Honda FIT Honda FIT Rear Driver & Passenger Side 2 Piece Brake Drum Set
2010-2013Honda Insight Honda Insight Rear Driver & Passenger Side 2 Piece Brake Drum Set

Part Interchange

Brand Label Part Number
Aimco 35094
Bendix PDR0746
DuraGo BD35094
Raybestos Brakes 9724
Wagner BD125769

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: BRA75099
Product Reviews
There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Honda Civic FIT Insight Rear Driver & Passenger Side 2 Piece Brake Drum Set TRQ-1ABDS00378 does not fit your:

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.