This Ignition Kit comes with NGK Laser Iridium Spark Plugs and TRQ Ignition coils.
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Buy Ignition Coils Part 1AECI00140 From 1A Auto Dodge Ram V8 Hemi
How to Install Performance Ignition Coils 2009-18 RAM 1500
How To Replace Spark Plugs 2009-17 Ram 1500
How to Replace Ignition Coils 2004-2009 Dodge Durango
How to Replace Ignition Coils 2006-10 Dodge Charger
Created on:
Tools used
No Tools Needed
1. No instructions needed
No instructions needed
Product review: 1AECI00140.
This is an ignition coil. Here's the original one from my vehicle and the new one from 1A Auto. This fit the Hemi V8 vehicles and you can see the original and the one from 1A Auto are exactly the same, has all the same connectors, and comes with the bolts installed. The only thing you have to add is just a little bit of dielectric grease and it will install just like the original.
Tools used
8mm Socket
Drill
Swivel
Pocket Screwdriver
Tools used
Torque Wrench
Socket Extensions
Socket Driver
Spark Plug Gapping Tool
10mm Socket
5/8 Inch Spark Plug Socket
Ratchet
Pocket Screwdriver
All right, friends. To access the sparkplugs, we need to go ahead and get the air intake out of the way there's going to be a clamp right down here. Loosen that up. Come right up here to your air and tap sensor. Take that off of there. Come over to your box. Open up all of your clamps going all the way around. Remove this right here. Lift this up and off of here and set it aside. Let's grab this cover, lift it straight up and get it out of here, as well. Now we have a nice clear view of all of our coils along the passenger's side. We're gonna come over here to the lock, go ahead and lift up on that so it's in the unlocked position.
Take a nice screwdriver or even your thumb, press on this tab in the center, and then carefully lift this up and away. Now let's go ahead and remove our coil from here by removing the two mounting bolts. Grab your coil, give it a nice wiggle and draw it away. Let's get the air filter outta here and set it aside. Now let's take some air and we're gonna it blow inside of our two tubes here. Now we're going to use our 5/8 spark plug socket, we're gonna come right inside the port, remove our spark plug. There it is friends.
Now it's gonna be time to install our brand new spark plugs. You just want to pay special attention to this area here and make sure it didn't get peened over during shipping. Typically, you shouldn't have to gap this. So let's go ahead and get it installed. Carefully put this in by hand, so that way there you're definitely not going to cross-thread it in, we'll bottom this out, and then we'll tighten it to manufacturer's specifications. Now we're going to go ahead and torque these to 13-foot pounds. You definitely want to make sure you don't go higher than 15-foot pounds because you could either damage the sparkplug or even the head of the engine. The process will be the same for all the sparkplugs.
So, obviously, you want to do this one before you go ahead and put that coil back on. Now it's going to be time to get our coil on here. Before we go ahead and install it, let's use a little bit of dielectric grease on here. And now we'll just slide these down into the corresponding tubes starting both the bolts and we'll snug them up. Grab your electrical connector, slide it on here, lock it in. Do the same to all. Get the air filter back in here. Let's get our engine cover back on here. Slide it over. Let's get our air inlet back in the area here. Tighten up that clamp. Air temp sensor. Put your air filter box back together. And, of course, make sure you put your hose back on here. There you are, friends, close the hood. Take it for a road test.
Tools used
Dielectric Grease
13mm Socket
8mm Socket
10mm Wrench
10mm Socket
Ratchet
Tools used
Dielectric Grease
6mm Socket
Ratchet
Product Reviews
Loading reviews
4.57/ 5.07
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
1
1
0
0
Michael
July 9, 2021
Works amazing! Noticed a big difference in performance
Jaren
January 8, 2022
Came with correct parts and packaged beautifully. Everything worked great!
Must have
JOSEPH
April 16, 2022
Perfect kit to do the job the right way !
Good but not great
Brian
May 31, 2022
The OE had much better screws and were more solid. But the product works well. I hope they start using better hardware.
A good purchase.
Enrique
June 28, 2022
Everything arrived as ordered. Packaging could have been a bit better though nothing was harmed. Spark plugs and coils all fit as specified. The truck is running better than ever. I am satisfied with my purchase, the parts were good.
Tune up
Doug-
July 2, 2022
The plugs & coil packs fit perfect, though some were/are tough to remove and reinstall. My truck seems to have better pedal response compared to before the change out. Sorry no pictures though.
Thanks 1A Auto!
Great Parts and Perfect Fit
Rob
November 20, 2022
Great product at a great price, very happy I made my purchase from 1A auto! Highly recommend purchasing the spark plugs and ignition coils for your Ram 1500
Customer Q&A
why did he not show how to change the spark plug?July 10, 2021
John D
10
We do not currently have available a video for the replacement spark plug procedure. The videos associated with this kit are for the ignition coils.
July 10, 2021
Jessica D
Will this work on a 2013 hemi?November 2, 2021
Chad K
10
This part will not fit your vehicle, but we may have a part that is listed to fit.
Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
November 2, 2021
Jessica D
Will this fit my 2016 Ram 1500 Lone Star V8 5.7 hemi?May 23, 2022
Miguel C
10
Yes
May 23, 2022
A M
10
yes it will
May 23, 2022
Robert C
10
Yes perfectly
May 23, 2022
Jesse P
10
Yes, this part will fit your vehicle.
May 23, 2022
Jessica D
Will this part fit a 2015 ram 1500?June 4, 2022
Ralph L
10
This kit is listed to fit 2015 Ram 1500 Truck models with a V8 5.7L engine.
June 6, 2022
Jessica D
I don't usually order stuff like this on line? Will I be satisfied with my purchase ? asking for some feedback? Thank you for your time.September 2, 2022
Larry R
10
I purchased this for my 2014 R/T plus 5.7, working perfectly. I also have a 2019 Daytona 5.7 and I plan on purchasing again for it.
September 2, 2022
Renard T
Will it fit my 2015 ram rebel ?October 17, 2022
John D
10
Yes, this part will fit your vehicle.
October 17, 2022
Kelly S
Are the spark plugs pre gapped?January 5, 2023
Chris M
10
Hello,
Yes these spark plugs come pre gapped based on the vehicle information.
January 5, 2023
Ricale A
I was looking to see how hard it is to change in cylinders #5 & 7? It looks like a nightmare to get to. Please advise.March 7, 2023
John D
10
1, 3, 5 and 7 are all fine. That side of the engine is relatively wide open. Cylinders 6 and 8 are Difficult and Nightmare, in that order.
March 7, 2023
A M
10
The installation videos we have available for this part is on the listing.
March 8, 2023
Andra M
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Dodge is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Dodge or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.