Replaces
Part Details
TRQ ignition coils will have your engine running like new. TRQ ignition coils are manufactured to precise specifications using premium raw materials to optimize each vehicle's ignition system. To ensure peak performance, TRQ recommends replacing ignition coils in sets to prevent electrical output imbalances. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an ignition coil on this 2004 Nissan Titan with the 5.6 liter V8 engine. The items you need for this are a new ignition coil from 1AAuto.com and a 10 millimeter socket and ratchet.
Because this is a V8, you have 8 ignition coils. There's one right here that you have to go over the hose to get. Then you have these three. On the other side, you have the other four. All of these, you can access just from the front. We're going to show you on one, that's a little easier to see. You just want to start off by pushing the tab on the harness and disconnecting it. Then remove this 10 millimeter bolt that holds the ignition coil into place. Then we'll just fast forward as Don removes that. Once the bolts remove, the ignition coil will just pull up and out.
On the left is the old ignition coil. On the right is the new one from 1A Auto. You can see they're identical and they're going to fit exactly the same. Push a new ignition coil down into place and the replace that 10 millimeter bolt. Then we'll just fast forward as Don does this and tightens it out. Now, reconnect your harness and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
