Frequently bought together
Part Details
Works on most 1996 and newer OBD 2 American, European, and Asian vehicles
Supports all OBD2 protocalls incuding newer (CAN) Controller Area Network (Will not work on OBD 1 vehicles)
Read and display (DTC) Diagnostic Trouble Codes, view freeze frame data, turn off check engine light, erase codes and more
Item Condition:
New
Wear and Tear
This item is backed by a 60-day warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
We have an OBD2 code scanner. You can buy this from 1AAuto.com. It's a very simple tool. If you've got a check engine light on, it'll tell you what code it is. So this car does. We're going to go check it out.
You need to find your OBD2 port that'll vary from car to car. This one's underneath the dash here. That should be it there. Once you get plugged in, this will power on. We're going to follow the instructions on the screen. Let's see. I want to hit enter. We're going to turn the key on too.
Codes found, one. Let's see. If you want to read codes, hit the scroll button, enter. P0457, evaporative emissions fuel leak, so a fuel cap loose/off. I should double check the fuel cap, make sure it's tight and if it's not that, I'll have to keep diagnosing it.
But that's the basic tool. Then we can go back out and if I want to, I'm going to choose to erase that right now. I'll hit yes. And now my check engine light will be off. We're all set.
Just unplug it from the car, turn the key off, and that's how you use this basic code scanner.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
We have an OBD2 code scanner. You can buy this from 1AAuto.com. It's a very simple tool. If you've got a check engine light on, it'll tell you what code it is. So this car does. We're going to go check it out.
You need to find your OBD2 port that'll vary from car to car. This one's underneath the dash here. That should be it there. Once you get plugged in, this will power on. We're going to follow the instructions on the screen. Let's see. I want to hit enter. We're going to turn the key on too.
Codes found, one. Let's see. If you want to read codes, hit the scroll button, enter. P0457, evaporative emissions fuel leak, so a fuel cap loose/off. I should double check the fuel cap, make sure it's tight and if it's not that, I'll have to keep diagnosing it.
But that's the basic tool. Then we can go back out and if I want to, I'm going to choose to erase that right now. I'll hit yes. And now my check engine light will be off. We're all set.
Just unplug it from the car, turn the key off, and that's how you use this basic code scanner.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
What's up, guys? I'm Andy from 1A Auto. In this video, I'm going to show you some of the functions of this OBD2 code reader that we sell at 1aauto.com. If you need parts or tools for your vehicle, click the link in the description and head on over to 1aauto.com.
You want to connect this to the OBD2 port on your vehicle. A lot of them are under the dash here, and then turn the key on and follow the instructions on the tool. Right on this main menu, if you scroll on the right, there are some different things you can click on. You can click on language and units of measurement. So if you wanted American or metric. The color of the screen you can change, or exit. Let's exit out of here.
Once you're on this screen, hit enter. It's going to scan the car right now. It shows that there's no codes read. The monitors--there's four monitors. Three of them are okay. Now, on this screen, we can read the codes, which we know there's no codes. We can erase the codes.
Next one down is view freeze frame. Freeze frame would only be there if you actually had a code, and it's only going to be some data that you'll be able to see. That's the data that happened right when that code was set. The readiness. We can check the readiness codes if it's ready to pass an inspection. Vehicle info and exit. Vehicle info, turn the key on. Engine off and press enter. We can check the vehicle ID number, the VIN number. Exit out of that. Calibration ID. Exit out of that. Verification number and previous menu.
Let's go back up to readiness. Click on the readiness codes. Since DTC cleared, this drive cycle, or previous menu. Let's click on since the DTCs cleared. It can show that the MIL light is off. That's the check engine light. Misfire monitor is okay and the fuel system okay. You can scroll through and it shows a bunch of other things. Some of the things do not apply. And, it's back to the other screen. So, there's some of the features of this scan tool. If you'd like one of these, get yours at 1aauto.com.
Thanks for watching. Visit 1aauto.com, your place for DIY auto repairs, for great parts, great service, and more content
What's up, guys? I'm Andy from 1A Auto. In this video, I'm going to show you some of the functions of this OBD2 code reader that we sell at 1aauto.com. If you need parts or tools for your vehicle, click the link in the description and head on over to 1aauto.com.
You want to connect this to the OBD2 port on your vehicle. A lot of them are under the dash here, and then turn the key on and follow the instructions on the tool. Right on this main menu, if you scroll on the right, there are some different things you can click on. You can click on language and units of measurement. So if you wanted American or metric. The color of the screen you can change, or exit. Let's exit out of here.
Once you're on this screen, hit enter. It's going to scan the car right now. It shows that there's no codes read. The monitors--there's four monitors. Three of them are okay. Now, on this screen, we can read the codes, which we know there's no codes. We can erase the codes.
Next one down is view freeze frame. Freeze frame would only be there if you actually had a code, and it's only going to be some data that you'll be able to see. That's the data that happened right when that code was set. The readiness. We can check the readiness codes if it's ready to pass an inspection. Vehicle info and exit. Vehicle info, turn the key on. Engine off and press enter. We can check the vehicle ID number, the VIN number. Exit out of that. Calibration ID. Exit out of that. Verification number and previous menu.
Let's go back up to readiness. Click on the readiness codes. Since DTC cleared, this drive cycle, or previous menu. Let's click on since the DTCs cleared. It can show that the MIL light is off. That's the check engine light. Misfire monitor is okay and the fuel system okay. You can scroll through and it shows a bunch of other things. Some of the things do not apply. And, it's back to the other screen. So, there's some of the features of this scan tool. If you'd like one of these, get yours at 1aauto.com.
Thanks for watching. Visit 1aauto.com, your place for DIY auto repairs, for great parts, great service, and more content
