Kit Includes: (1) Passenger Side Mirror (1) Driver Side Mirror
Mirror Memory Type: Memory
Adjustment Type: Electric
Specification
Side Location
Driver & Passenger Side
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Direct Bolt-on Replacement: No modifications for an easy install
DOT Certified: Built to the highest quality standards
Complies with federal safety standard FMVSS-111
Matching set for a renewed appearance
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Product Wiring Guide - Power Folding Mirror 2007-16 Toyota Tundra Sequoia
Created on:
Tools used
Gloves
1. Power Fold Feature Connections Explained
Take a red wire from the module
Strip the end and insert it into a butt connector leading to the add a fuse circuit
Remove a factory 5 amp fuse (such as the cigarette lighter light)
Attach the black wire/ground to a rust-free clean bolt on bare metal underneath the dash
Connect the green connector to the switch
If you do not have factory power fold, peel the backing from the base plate on the mirror
Pull out the white and yellow connector that connects to the factory harness
Disconnect the white and yellow connector from blue and purple connectors
Run the white and yellow connector through the opening in the shield
Connect the white and yellow connector to the small powerfold feature harness
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
Here we have our upgraded tow mirror for the 2008 to '16 Toyota Sequoias, as well as the 2007 to 2016 Toyota Tundras. Now we understand there's been some confusion as to how you hook up the power fold feature in vehicles that were not equipped with factory power fold. To make it clear, we're going to show you exactly where this harness connects into your mirror as well as where you should be expecting to make these other connections to hook up your aftermarket power fold feature.
This red wire will be stripped and installed into this butt connector here, which leads to our add a fuse circuit here—which will remove a factory five amp or higher fuse from your fuse panel. We recommend something like your cigarette lighter, that will only work with the vehicle's power on. You will remove that fuse. Install this and install the fuse you removed into this open terminal here, while this will supply power to the switch. This black wire will be attached to a rust free clean bolt on bare metal somewhere underneath your dashboard to ground this switch to the chassis.
The green connector will connect into your switch, which you'll cut a hole and mount into your dash. Now if your vehicle did not have the factory power fold, this connection needs to be tapped into the mirror. This is where a lot of people have been having trouble. What you have to do is peel the backing here off the base plate of the mirror. Down where your connector is that your factory wiring harness will plug into. Inside you'll find this white and yellow connector here going into the connector for your factory harness.
This is looped from the factory to make sure if your vehicle had factory power fold that this option is plug and play. However, for those of you watching this video, to add this feature to your vehicle, you want to disconnect this connector, run it through the small opening and this shielding, lay the backing back into place and connect the appropriate side of the harness included with your kit to that connection. If everything is hooked up correctly, this will allow the power fold function to work off of the aftermarket switch and harness included in your kit.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
MRA04706
In Stock
Product Reviews
Loading reviews
4.25/ 5.04
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
1
0
Great purchase saved over factory
Tundra man
January 23, 2018
Bought these. They look very good just like the original and I save a lot of money. Toyota wanted 400 dollars just to replace the glass. I bought this pair for 358. Installation was very straight forward total time about 1 hour and half.
Perfection: From Order to Installation
C
February 5, 2018
I was cautiously excited to find these mirrors, and at a great price. The dealer wanted $714 each and the local junk yard wanted $150 each for used ones.
I really felt like they'd be a decent replacment. What I got is a set of mirrors which have no discernible difference from the originals.
The installation was a snap. However, be warned: start the installation with all tools and parts on hand. If not, it'll take about two hours to install them. If so, about 15 minutes per side.
Mailbox Mess up FIXED like new!
D
November 27, 2018
After a brief collision with a mailbox, 1A Auto to the rescue! The video sold me on how easy it was to remove and replace the units. I was amazed at how easy it was and how the quality of the mirrors are. Drop in replacement. I'm very satisfied and of course, the bride is too. I'd do it again knowing how easy and how good they look!
Get what you pay for
lucas
October 9, 2022
Diver mirror power fold stopped working after 10 months
Customer Q&A
How does the power fold work? My current mirror doesnt have that option. Can I still install these? 2010 Toyota TundraMarch 23, 2018
Daniel D
10
We advise that you order mirrors with the same exact mirror options as our original mirrors.
Special Note:
These mirrors will only work for vehicles with these exact options. If you do not have the options listed, these mirrors will not function properly.
Our mirrors are intended to be a direct plug and play for the exact options listed.
March 28, 2018
Adam G
Will these mirrors work with 2013 Toyota Tundra sr5 ?November 15, 2019
James C
10
These will fit your vehicle as long as the features on these mirrors are the same exact features as your OE mirrors. Thanks for the inquiry!
November 15, 2019
Andra M
Do these have auto dimming ?May 27, 2020
Richard M
10
Thank you for your inquiry. Mirrors should be replaced in an "option for option" fashion. If your mirrors do not have the same options that are listed in our listing, there is a possibility that this mirror may not function properly. These do NOT have auto dimming. They have:
Power Mirrors
Power Folding
Puddle Light
Memory
Heated
Turn Signals
Please let us know if you have any other questions.
May 27, 2020
Christa R
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.