Replaces
Item Condition:
New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence. That saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.
8mm bolt here that holds the cover in place. Bring that up, and then the cover comes forward and off.
Disconnect the electrical lead by pulling the little tab out and up. Push on the clip to the side, twist up, and pull the hose off. You have an 8mm bolt here that holds it in. Remove the bolt. Pull the valve up and out. Remove that.
Then put it onto your new one. Got my new one, so I’ll just put a little bit of oil on my finger, and then put on that O-ring to make sure it goes in easily. Put it down and in, and secure it with the bolt. Tighten it up.
Clean up your engine cover, and then you put it in. Just make sure it locks back in to the tabs back there. Get it in place and tighten it up with the 8mm socket ratchet.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
