Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to replace the parking light, the front parking light, on this 1998 Volvo S70. This is the same for any '98 to 2000 model and no tools are required. I want to come in right here and right down there, there's a little tab that you press down. Next, I'm going to reach in, press down that tab, then push the light out. Then, there's a wire retainer right here. You just press down on that and your harness disconnects.
To change the bulb, turn counter clockwise. Pull that socket out and then turn the bulb counter clockwise and it comes out. To put it back together, clockwise will lock the bulb in there. Line up the tabs on your light and your socket. It's a little bit just got to get it to go in. Press it to lock.
Get a new light from 1A Auto, in case your old one is broken, and put it into place, and get your harness out. Press down on the wire retainer, reconnect it. Put it into place. There is a tab back here that lines up with the fender and then there are two tabs on the light that go into slots in the light. Make sure everything is going in the way it should. It should clip right into place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
