WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
How To Replace Ignition Coil 2007-13 Chevy Silverado
Created on:
Tools used
10mm Socket
Ratchet
1. Removing the Ignition Coil
Disconnect the ignition coil wiring harness
Remove the two 10mm bolts from the ignition coil
Remove the ignition coil
Disconnect the spark plug wire
2. Installing the Ignition Coil
Connect the ignition coil into place
Insert the 10mm bolts by hand
Tighten the 10mm bolts
Connect the spark plug wire
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an ignition coil on this 2011 Chevy Silverado 1500 with the 5.3-liter V8. It's a similar process on a large variety of GM models from 2007 to 2012. The only tool that you'll need for this is a 10mm socket and ratchet.
We're just going to show you on this ignition coil right here, but you can see there's four on either side since it is a V8. What you want to do first is just disconnect the harness at the top, and then remove these two 10mm bolts right here. Once those screws are out, you can pull the ignition coil away and just disconnect the spark plug wire.
Take your new ignition coil and put it back in place. Plug that harness back in at the top, line up those holes, and replace those two 10mm bolts. We'll speed up here. Notice he threads them in first by hand, and then tightens them up with the socket and ratchet. Then reconnect your spark plug wire and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
TKA06266
In Stock
Product Reviews
Loading reviews
4.00/ 5.03
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
1
0
Weak products, will not purchase again
Sean
March 30, 2023
After installing these parts on my vehicle the vehicle started to run bad. I brought the vehicle to a licensed mechanic who performed an arch test/compression test and found that these parts were not functioning. The spark on these products were weak and not performing the way advertised. Will not be purchasing again.
Good parts easy to pay and fast delivery 100% guarantee
Customer Q&A
Will this work with the 5.3L engine?December 4, 2022
Nathaniel D
10
Yes, this part will fit your vehicle.
December 5, 2022
Kelly S
Will this work for the 6.2l engine?March 17, 2023
Christian V
10
What is the year, make and model of the vehicle? We can then check fitment for you.
March 17, 2023
Andra M
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
GMC is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by GMC or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.