Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Corner Light 1992-94 Toyota Camry
Created on:
Tools used
Phillips Head Screwdriver
1. Removing the Corner Light
Remove the Phillips head screw from the top of the corner light
Slide the corner light forward
Twist the corner light bulb counterclockwise out
2. Servicing the Corner Light Bulb
Pull the bulb out of the socket
Push the new bulb onto the socket
3. Installing the New Corner Light
Twist the bulb clockwise into the corner light
Push the light into place using the locating pins
Insert the Phillips screw into the top of the corner light
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to replace the side marker light, the one right next to the headlight, on this '94 Camry, same as any '92 to '96. The only thing you'll need is a Phillips screwdriver.
Whether you're looking to change the bulb in here or this side marker got damaged, there's just a Phillips screw right up here. Remove that and then, depending on your vehicle, it may be more or less difficult, but it slides forward. Then, in behind, you just turn the connector counterclockwise.
The bulb pulls out, pushes in. If you had broken your light, you can see the replacement from 1A Auto is all the same. The bulb goes in and twists. There is a pin right here and a locating pin here. Just make sure those go in the right spot. Force it in just a little bit, push it back into place. Screw it right in.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
TY370-B100R
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.